Discussion:
[PATCH v5 3/6] dt-bindings: List devicetree binding for the CCU of Allwinner A20
Add Reply
Priit Laes
2017-07-04 20:04:58 UTC
Reply
Permalink
Raw Message
Allwinner A20 is now driven by sunxi-ng CCU driver.

Add devicetree binding for it.

Acked-by: Rob Herring <***@kernel.org>
Signed-off-by: Priit Laes <***@plaes.org>
---
Documentation/devicetree/bindings/clock/sunxi-ccu.txt | 1 +
1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
index df9fad5..81d0fa4 100644
--- a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
+++ b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
@@ -4,6 +4,7 @@ Allwinner Clock Control Unit Binding
Required properties :
- compatible: must contain one of the following compatibles:
- "allwinner,sun6i-a31-ccu"
+ - "allwinner,sun7i-a20-ccu"
- "allwinner,sun8i-a23-ccu"
- "allwinner,sun8i-a33-ccu"
- "allwinner,sun8i-a83t-ccu"
--
git-series 0.9.1
--
You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+***@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
Priit Laes
2017-07-04 20:04:57 UTC
Reply
Permalink
Raw Message
Introduce a clock controller driver for sun4i A10 and sun7i A20
series SoCs.

Signed-off-by: Priit Laes <***@plaes.org>
---
drivers/clk/sunxi-ng/Kconfig | 14 +-
drivers/clk/sunxi-ng/Makefile | 1 +-
drivers/clk/sunxi-ng/ccu-sun4i-a10.c | 1448 ++++++++++++++++++++++-
drivers/clk/sunxi-ng/ccu-sun4i-a10.h | 61 +-
include/dt-bindings/clock/sun4i-a10-ccu.h | 200 +++-
include/dt-bindings/clock/sun7i-a20-ccu.h | 53 +-
include/dt-bindings/reset/sun4i-a10-ccu.h | 67 +-
7 files changed, 1844 insertions(+)
create mode 100644 drivers/clk/sunxi-ng/ccu-sun4i-a10.c
create mode 100644 drivers/clk/sunxi-ng/ccu-sun4i-a10.h
create mode 100644 include/dt-bindings/clock/sun4i-a10-ccu.h
create mode 100644 include/dt-bindings/clock/sun7i-a20-ccu.h
create mode 100644 include/dt-bindings/reset/sun4i-a10-ccu.h

diff --git a/drivers/clk/sunxi-ng/Kconfig b/drivers/clk/sunxi-ng/Kconfig
index 7342928..381cc32 100644
--- a/drivers/clk/sunxi-ng/Kconfig
+++ b/drivers/clk/sunxi-ng/Kconfig
@@ -11,6 +11,19 @@ config SUN50I_A64_CCU
default ARM64 && ARCH_SUNXI
depends on (ARM64 && ARCH_SUNXI) || COMPILE_TEST

+config SUNXI_A10_CCU
+ bool "Support for the Allwinner A10/A20 CCU"
+ select SUNXI_CCU_DIV
+ select SUNXI_CCU_MULT
+ select SUNXI_CCU_NK
+ select SUNXI_CCU_NKM
+ select SUNXI_CCU_NM
+ select SUNXI_CCU_MP
+ select SUNXI_CCU_PHASE
+ default MACH_SUN4I
+ default MACH_SUN7I
+ depends on MACH_SUN4I || MACH_SUN7I || COMPILE_TEST
+
config SUN5I_CCU
bool "Support for the Allwinner sun5i family CCM"
default MACH_SUN5I
@@ -57,4 +70,5 @@ config SUN8I_R_CCU
bool "Support for Allwinner SoCs' PRCM CCUs"
default MACH_SUN8I || (ARCH_SUNXI && ARM64)

+
endif
diff --git a/drivers/clk/sunxi-ng/Makefile b/drivers/clk/sunxi-ng/Makefile
index 0c45fa5..01e958c 100644
--- a/drivers/clk/sunxi-ng/Makefile
+++ b/drivers/clk/sunxi-ng/Makefile
@@ -21,6 +21,7 @@ lib-$(CONFIG_SUNXI_CCU) += ccu_mp.o
obj-$(CONFIG_SUN50I_A64_CCU) += ccu-sun50i-a64.o
obj-$(CONFIG_SUN5I_CCU) += ccu-sun5i.o
obj-$(CONFIG_SUN6I_A31_CCU) += ccu-sun6i-a31.o
+obj-$(CONFIG_SUNXI_A10_CCU) += ccu-sun4i-a10.o
obj-$(CONFIG_SUN8I_A23_CCU) += ccu-sun8i-a23.o
obj-$(CONFIG_SUN8I_A33_CCU) += ccu-sun8i-a33.o
obj-$(CONFIG_SUN8I_A83T_CCU) += ccu-sun8i-a83t.o
diff --git a/drivers/clk/sunxi-ng/ccu-sun4i-a10.c b/drivers/clk/sunxi-ng/ccu-sun4i-a10.c
new file mode 100644
index 0000000..49052b7
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu-sun4i-a10.c
@@ -0,0 +1,1448 @@
+/*
+ * Copyright (c) 2017 Priit Laes <***@plaes.org>.
+ * Copyright (c) 2017 Maxime Ripard.
+ * Copyright (c) 2017 Jonathan Liu.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/of_address.h>
+
+#include "ccu_common.h"
+#include "ccu_reset.h"
+
+#include "ccu_div.h"
+#include "ccu_gate.h"
+#include "ccu_mp.h"
+#include "ccu_mult.h"
+#include "ccu_nk.h"
+#include "ccu_nkm.h"
+#include "ccu_nkmp.h"
+#include "ccu_nm.h"
+#include "ccu_phase.h"
+
+#include "ccu-sun4i-a10.h"
+
+static struct ccu_nkmp pll_core_clk = {
+ .enable = BIT(31),
+ .n = _SUNXI_CCU_MULT_OFFSET(8, 5, 0),
+ .k = _SUNXI_CCU_MULT(4, 2),
+ .m = _SUNXI_CCU_DIV(0, 2),
+ .p = _SUNXI_CCU_DIV(16, 2),
+ .common = {
+ .reg = 0x000,
+ .hw.init = CLK_HW_INIT("pll-core",
+ "hosc",
+ &ccu_nkmp_ops,
+ 0),
+ },
+};
+
+/*
+ * The Audio PLL is supposed to have 4 outputs: 3 fixed factors from
+ * the base (2x, 4x and 8x), and one variable divider (the one true
+ * pll audio).
+ *
+ * We don't have any need for the variable divider for now, so we just
+ * hardcode it to match with the clock names.
+ */
+#define SUN4I_PLL_AUDIO_REG 0x008
+static struct ccu_nm pll_audio_base_clk = {
+ .enable = BIT(31),
+ .n = _SUNXI_CCU_MULT_OFFSET(8, 7, 0),
+ .m = _SUNXI_CCU_DIV_OFFSET(0, 5, 0),
+ .common = {
+ .reg = 0x008,
+ .hw.init = CLK_HW_INIT("pll-audio-base",
+ "hosc",
+ &ccu_nm_ops,
+ 0),
+ },
+
+};
+
+static struct ccu_mult pll_video0_clk = {
+ .enable = BIT(31),
+ .mult = _SUNXI_CCU_MULT_OFFSET_MIN_MAX(0, 7, 0, 9, 127),
+ .frac = _SUNXI_CCU_FRAC(BIT(15), BIT(14),
+ 270000000, 297000000),
+ .common = {
+ .reg = 0x010,
+ .features = (CCU_FEATURE_FRACTIONAL |
+ CCU_FEATURE_ALL_PREDIV),
+ .prediv = 8,
+ .hw.init = CLK_HW_INIT("pll-video0",
+ "hosc",
+ &ccu_mult_ops,
+ 0),
+ },
+};
+
+static struct ccu_nkmp pll_ve_sun4i_clk = {
+ .enable = BIT(31),
+ .n = _SUNXI_CCU_MULT_OFFSET(8, 5, 0),
+ .k = _SUNXI_CCU_MULT(4, 2),
+ .m = _SUNXI_CCU_DIV(0, 2),
+ .p = _SUNXI_CCU_DIV(16, 2),
+ .common = {
+ .reg = 0x018,
+ .hw.init = CLK_HW_INIT("pll-ve",
+ "hosc",
+ &ccu_nkmp_ops,
+ 0),
+ },
+};
+
+static struct ccu_nk pll_ve_sun7i_clk = {
+ .enable = BIT(31),
+ .n = _SUNXI_CCU_MULT_OFFSET(8, 5, 0),
+ .k = _SUNXI_CCU_MULT(4, 2),
+ .common = {
+ .reg = 0x018,
+ .hw.init = CLK_HW_INIT("pll-ve",
+ "hosc",
+ &ccu_nk_ops,
+ 0),
+ },
+};
+
+static struct ccu_nk pll_ddr_base_clk = {
+ .enable = BIT(31),
+ .n = _SUNXI_CCU_MULT_OFFSET(8, 5, 0),
+ .k = _SUNXI_CCU_MULT(4, 2),
+ .common = {
+ .reg = 0x020,
+ .hw.init = CLK_HW_INIT("pll-ddr-base",
+ "hosc",
+ &ccu_nk_ops,
+ 0),
+ },
+};
+
+static SUNXI_CCU_M(pll_ddr_clk, "pll-ddr", "pll-ddr-base", 0x020, 0, 2,
+ CLK_IS_CRITICAL);
+
+static struct ccu_div pll_ddr_other_clk = {
+ .div = _SUNXI_CCU_DIV_FLAGS(16, 2, CLK_DIVIDER_POWER_OF_TWO),
+ .common = {
+ .reg = 0x020,
+ .hw.init = CLK_HW_INIT("pll-ddr-other", "pll-ddr-base",
+ &ccu_div_ops,
+ 0),
+ },
+};
+
+static struct ccu_nk pll_periph_base_clk = {
+ .enable = BIT(31),
+ .n = _SUNXI_CCU_MULT_OFFSET(8, 5, 0),
+ .k = _SUNXI_CCU_MULT(4, 2),
+ .common = {
+ .reg = 0x028,
+ .hw.init = CLK_HW_INIT("pll-periph-base",
+ "hosc",
+ &ccu_nk_ops,
+ 0),
+ },
+};
+
+static CLK_FIXED_FACTOR(pll_periph_clk, "pll-periph", "pll-periph-base",
+ 2, 1, CLK_SET_RATE_PARENT);
+
+/* Not documented on A10 */
+static struct ccu_div pll_periph_sata_clk = {
+ .enable = BIT(14),
+ .div = _SUNXI_CCU_DIV(0, 2),
+ .fixed_post_div = 6,
+ .common = {
+ .reg = 0x028,
+ .features = CCU_FEATURE_FIXED_POSTDIV,
+ .hw.init = CLK_HW_INIT("pll-periph-sata",
+ "pll-periph-base",
+ &ccu_div_ops, 0),
+ },
+};
+
+static struct ccu_mult pll_video1_clk = {
+ .enable = BIT(31),
+ .mult = _SUNXI_CCU_MULT_OFFSET_MIN_MAX(0, 7, 0, 9, 127),
+ .frac = _SUNXI_CCU_FRAC(BIT(15), BIT(14),
+ 270000000, 297000000),
+ .common = {
+ .reg = 0x030,
+ .features = (CCU_FEATURE_FRACTIONAL |
+ CCU_FEATURE_ALL_PREDIV),
+ .prediv = 8,
+ .hw.init = CLK_HW_INIT("pll-video1",
+ "hosc",
+ &ccu_mult_ops,
+ 0),
+ },
+};
+
+/* Not present on A10 */
+static struct ccu_nk pll_gpu_clk = {
+ .enable = BIT(31),
+ .n = _SUNXI_CCU_MULT_OFFSET(8, 5, 0),
+ .k = _SUNXI_CCU_MULT(4, 2),
+ .common = {
+ .reg = 0x040,
+ .hw.init = CLK_HW_INIT("pll-gpu",
+ "hosc",
+ &ccu_nk_ops,
+ 0),
+ },
+};
+
+static SUNXI_CCU_GATE(hosc_clk, "hosc", "osc24M", 0x050, BIT(0), 0);
+
+static const char *const cpu_parents[] = { "osc32k", "hosc",
+ "pll-core", "pll-periph" };
+static const struct ccu_mux_fixed_prediv cpu_predivs[] = {
+ { .index = 3, .div = 3, },
+};
+
+#define SUN4I_AHB_REG 0x054
+static struct ccu_mux cpu_clk = {
+ .mux = {
+ .shift = 16,
+ .width = 2,
+ .fixed_predivs = cpu_predivs,
+ .n_predivs = ARRAY_SIZE(cpu_predivs),
+ },
+ .common = {
+ .reg = 0x054,
+ .features = CCU_FEATURE_FIXED_PREDIV,
+ .hw.init = CLK_HW_INIT_PARENTS("cpu",
+ cpu_parents,
+ &ccu_mux_ops,
+ CLK_IS_CRITICAL),
+ }
+};
+
+static SUNXI_CCU_M(axi_clk, "axi", "cpu", 0x054, 0, 2, 0);
+
+static struct ccu_div ahb_sun4i_clk = {
+ .div = _SUNXI_CCU_DIV_FLAGS(4, 2, CLK_DIVIDER_POWER_OF_TWO),
+ .common = {
+ .reg = 0x054,
+ .hw.init = CLK_HW_INIT("ahb", "axi", &ccu_div_ops, 0),
+ },
+};
+
+static const char *const ahb_sun7i_parents[] = { "axi", "pll-periph",
+ "pll-periph" };
+static const struct ccu_mux_fixed_prediv ahb_sun7i_predivs[] = {
+ { .index = 1, .div = 2, },
+ { /* Sentinel */ },
+};
+static struct ccu_div ahb_sun7i_clk = {
+ .div = _SUNXI_CCU_DIV_FLAGS(4, 2, CLK_DIVIDER_POWER_OF_TWO),
+ .mux = {
+ .shift = 6,
+ .width = 2,
+ .fixed_predivs = ahb_sun7i_predivs,
+ .n_predivs = ARRAY_SIZE(ahb_sun7i_predivs),
+ },
+
+ .common = {
+ .reg = 0x054,
+ .hw.init = CLK_HW_INIT_PARENTS("ahb",
+ ahb_sun7i_parents,
+ &ccu_div_ops,
+ 0),
+ },
+};
+
+static struct clk_div_table apb0_div_table[] = {
+ { .val = 0, .div = 2 },
+ { .val = 1, .div = 2 },
+ { .val = 2, .div = 4 },
+ { .val = 3, .div = 8 },
+ { /* Sentinel */ },
+};
+static SUNXI_CCU_DIV_TABLE(apb0_clk, "apb0", "ahb",
+ 0x054, 8, 2, apb0_div_table, 0);
+
+static const char *const apb1_parents[] = { "hosc", "pll-periph", "osc32k" };
+static SUNXI_CCU_MP_WITH_MUX(apb1_clk, "apb1", apb1_parents, 0x058,
+ 0, 5, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ 0);
+
+/* Not present on A20 */
+static SUNXI_CCU_GATE(axi_dram_clk, "axi-dram", "ahb",
+ 0x05c, BIT(31), 0);
+
+static SUNXI_CCU_GATE(ahb_otg_clk, "ahb-otg", "ahb",
+ 0x060, BIT(0), 0);
+static SUNXI_CCU_GATE(ahb_ehci0_clk, "ahb-ehci0", "ahb",
+ 0x060, BIT(1), 0);
+static SUNXI_CCU_GATE(ahb_ohci0_clk, "ahb-ohci0", "ahb",
+ 0x060, BIT(2), 0);
+static SUNXI_CCU_GATE(ahb_ehci1_clk, "ahb-ehci1", "ahb",
+ 0x060, BIT(3), 0);
+static SUNXI_CCU_GATE(ahb_ohci1_clk, "ahb-ohci1", "ahb",
+ 0x060, BIT(4), 0);
+static SUNXI_CCU_GATE(ahb_ss_clk, "ahb-ss", "ahb",
+ 0x060, BIT(5), 0);
+static SUNXI_CCU_GATE(ahb_dma_clk, "ahb-dma", "ahb",
+ 0x060, BIT(6), 0);
+static SUNXI_CCU_GATE(ahb_bist_clk, "ahb-bist", "ahb",
+ 0x060, BIT(7), 0);
+static SUNXI_CCU_GATE(ahb_mmc0_clk, "ahb-mmc0", "ahb",
+ 0x060, BIT(8), 0);
+static SUNXI_CCU_GATE(ahb_mmc1_clk, "ahb-mmc1", "ahb",
+ 0x060, BIT(9), 0);
+static SUNXI_CCU_GATE(ahb_mmc2_clk, "ahb-mmc2", "ahb",
+ 0x060, BIT(10), 0);
+static SUNXI_CCU_GATE(ahb_mmc3_clk, "ahb-mmc3", "ahb",
+ 0x060, BIT(11), 0);
+static SUNXI_CCU_GATE(ahb_ms_clk, "ahb-ms", "ahb",
+ 0x060, BIT(12), 0);
+static SUNXI_CCU_GATE(ahb_nand_clk, "ahb-nand", "ahb",
+ 0x060, BIT(13), 0);
+static SUNXI_CCU_GATE(ahb_sdram_clk, "ahb-sdram", "ahb",
+ 0x060, BIT(14), CLK_IS_CRITICAL);
+
+static SUNXI_CCU_GATE(ahb_ace_clk, "ahb-ace", "ahb",
+ 0x060, BIT(16), 0);
+static SUNXI_CCU_GATE(ahb_emac_clk, "ahb-emac", "ahb",
+ 0x060, BIT(17), 0);
+static SUNXI_CCU_GATE(ahb_ts_clk, "ahb-ts", "ahb",
+ 0x060, BIT(18), 0);
+static SUNXI_CCU_GATE(ahb_spi0_clk, "ahb-spi0", "ahb",
+ 0x060, BIT(20), 0);
+static SUNXI_CCU_GATE(ahb_spi1_clk, "ahb-spi1", "ahb",
+ 0x060, BIT(21), 0);
+static SUNXI_CCU_GATE(ahb_spi2_clk, "ahb-spi2", "ahb",
+ 0x060, BIT(22), 0);
+static SUNXI_CCU_GATE(ahb_spi3_clk, "ahb-spi3", "ahb",
+ 0x060, BIT(23), 0);
+static SUNXI_CCU_GATE(ahb_pata_clk, "ahb-pata", "ahb",
+ 0x060, BIT(24), 0);
+/* Not documented on A20 */
+static SUNXI_CCU_GATE(ahb_sata_clk, "ahb-sata", "ahb",
+ 0x060, BIT(25), 0);
+/* Not present on A20 */
+static SUNXI_CCU_GATE(ahb_gps_clk, "ahb-gps", "ahb",
+ 0x060, BIT(26), 0);
+/* Not present on A10 */
+static SUNXI_CCU_GATE(ahb_hstimer_clk, "ahb-hstimer", "ahb",
+ 0x060, BIT(28), 0);
+
+static SUNXI_CCU_GATE(ahb_ve_clk, "ahb-ve", "ahb",
+ 0x064, BIT(0), 0);
+static SUNXI_CCU_GATE(ahb_tvd_clk, "ahb-tvd", "ahb",
+ 0x064, BIT(1), 0);
+static SUNXI_CCU_GATE(ahb_tve0_clk, "ahb-tve0", "ahb",
+ 0x064, BIT(2), 0);
+static SUNXI_CCU_GATE(ahb_tve1_clk, "ahb-tve1", "ahb",
+ 0x064, BIT(3), 0);
+static SUNXI_CCU_GATE(ahb_lcd0_clk, "ahb-lcd0", "ahb",
+ 0x064, BIT(4), 0);
+static SUNXI_CCU_GATE(ahb_lcd1_clk, "ahb-lcd1", "ahb",
+ 0x064, BIT(5), 0);
+static SUNXI_CCU_GATE(ahb_csi0_clk, "ahb-csi0", "ahb",
+ 0x064, BIT(8), 0);
+static SUNXI_CCU_GATE(ahb_csi1_clk, "ahb-csi1", "ahb",
+ 0x064, BIT(9), 0);
+/* Not present on A10 */
+static SUNXI_CCU_GATE(ahb_hdmi1_clk, "ahb-hdmi1", "ahb",
+ 0x064, BIT(10), 0);
+static SUNXI_CCU_GATE(ahb_hdmi0_clk, "ahb-hdmi0", "ahb",
+ 0x064, BIT(11), 0);
+static SUNXI_CCU_GATE(ahb_de_be0_clk, "ahb-de-be0", "ahb",
+ 0x064, BIT(12), 0);
+static SUNXI_CCU_GATE(ahb_de_be1_clk, "ahb-de-be1", "ahb",
+ 0x064, BIT(13), 0);
+static SUNXI_CCU_GATE(ahb_de_fe0_clk, "ahb-de-fe0", "ahb",
+ 0x064, BIT(14), 0);
+static SUNXI_CCU_GATE(ahb_de_fe1_clk, "ahb-de-fe1", "ahb",
+ 0x064, BIT(15), 0);
+/* Not present on A10 */
+static SUNXI_CCU_GATE(ahb_gmac_clk, "ahb-gmac", "ahb",
+ 0x064, BIT(17), 0);
+static SUNXI_CCU_GATE(ahb_mp_clk, "ahb-mp", "ahb",
+ 0x064, BIT(18), 0);
+static SUNXI_CCU_GATE(ahb_gpu_clk, "ahb-gpu", "ahb",
+ 0x064, BIT(20), 0);
+
+static SUNXI_CCU_GATE(apb0_codec_clk, "apb0-codec", "apb0",
+ 0x068, BIT(0), 0);
+static SUNXI_CCU_GATE(apb0_spdif_clk, "apb0-spdif", "apb0",
+ 0x068, BIT(1), 0);
+static SUNXI_CCU_GATE(apb0_ac97_clk, "apb0-ac97", "apb0",
+ 0x068, BIT(2), 0);
+static SUNXI_CCU_GATE(apb0_i2s0_clk, "apb0-i2s0", "apb0",
+ 0x068, BIT(3), 0);
+/* Not present on A10 */
+static SUNXI_CCU_GATE(apb0_i2s1_clk, "apb0-i2s1", "apb0",
+ 0x068, BIT(4), 0);
+static SUNXI_CCU_GATE(apb0_pio_clk, "apb0-pio", "apb0",
+ 0x068, BIT(5), 0);
+static SUNXI_CCU_GATE(apb0_ir0_clk, "apb0-ir0", "apb0",
+ 0x068, BIT(6), 0);
+static SUNXI_CCU_GATE(apb0_ir1_clk, "apb0-ir1", "apb0",
+ 0x068, BIT(7), 0);
+/* Not present on A10 */
+static SUNXI_CCU_GATE(apb0_i2s2_clk, "apb0-i2s2", "apb0",
+ 0x068, BIT(8), 0);
+static SUNXI_CCU_GATE(apb0_keypad_clk, "apb0-keypad", "apb0",
+ 0x068, BIT(10), 0);
+
+static SUNXI_CCU_GATE(apb1_i2c0_clk, "apb1-i2c0", "apb1",
+ 0x06c, BIT(0), 0);
+static SUNXI_CCU_GATE(apb1_i2c1_clk, "apb1-i2c1", "apb1",
+ 0x06c, BIT(1), 0);
+static SUNXI_CCU_GATE(apb1_i2c2_clk, "apb1-i2c2", "apb1",
+ 0x06c, BIT(2), 0);
+/* Not present on A10 */
+static SUNXI_CCU_GATE(apb1_i2c3_clk, "apb1-i2c3", "apb1",
+ 0x06c, BIT(3), 0);
+static SUNXI_CCU_GATE(apb1_can_clk, "apb1-can", "apb1",
+ 0x06c, BIT(4), 0);
+static SUNXI_CCU_GATE(apb1_scr_clk, "apb1-scr", "apb1",
+ 0x06c, BIT(5), 0);
+static SUNXI_CCU_GATE(apb1_ps20_clk, "apb1-ps20", "apb1",
+ 0x06c, BIT(6), 0);
+static SUNXI_CCU_GATE(apb1_ps21_clk, "apb1-ps21", "apb1",
+ 0x06c, BIT(7), 0);
+/* Not present on A10 */
+static SUNXI_CCU_GATE(apb1_i2c4_clk, "apb1-i2c4", "apb1",
+ 0x06c, BIT(15), 0);
+static SUNXI_CCU_GATE(apb1_uart0_clk, "apb1-uart0", "apb1",
+ 0x06c, BIT(16), 0);
+static SUNXI_CCU_GATE(apb1_uart1_clk, "apb1-uart1", "apb1",
+ 0x06c, BIT(17), 0);
+static SUNXI_CCU_GATE(apb1_uart2_clk, "apb1-uart2", "apb1",
+ 0x06c, BIT(18), 0);
+static SUNXI_CCU_GATE(apb1_uart3_clk, "apb1-uart3", "apb1",
+ 0x06c, BIT(19), 0);
+static SUNXI_CCU_GATE(apb1_uart4_clk, "apb1-uart4", "apb1",
+ 0x06c, BIT(20), 0);
+static SUNXI_CCU_GATE(apb1_uart5_clk, "apb1-uart5", "apb1",
+ 0x06c, BIT(21), 0);
+static SUNXI_CCU_GATE(apb1_uart6_clk, "apb1-uart6", "apb1",
+ 0x06c, BIT(22), 0);
+static SUNXI_CCU_GATE(apb1_uart7_clk, "apb1-uart7", "apb1",
+ 0x06c, BIT(23), 0);
+
+static const char *const mod0_default_parents[] = { "hosc", "pll-periph",
+ "pll-ddr-other" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(nand_clk, "nand", mod0_default_parents, 0x080,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+/* Undocumented on A10 */
+static SUNXI_CCU_MP_WITH_MUX_GATE(ms_clk, "ms", mod0_default_parents, 0x084,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc0_clk, "mmc0", mod0_default_parents, 0x088,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+/* MMC output and sample clocks are not present on A10 */
+static SUNXI_CCU_PHASE(mmc0_output_clk, "mmc0_output", "mmc0",
+ 0x088, 8, 3, 0);
+static SUNXI_CCU_PHASE(mmc0_sample_clk, "mmc0_sample", "mmc0",
+ 0x088, 20, 3, 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc1_clk, "mmc1", mod0_default_parents, 0x08c,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+/* MMC output and sample clocks are not present on A10 */
+static SUNXI_CCU_PHASE(mmc1_output_clk, "mmc1_output", "mmc1",
+ 0x08c, 8, 3, 0);
+static SUNXI_CCU_PHASE(mmc1_sample_clk, "mmc1_sample", "mmc1",
+ 0x08c, 20, 3, 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc2_clk, "mmc2", mod0_default_parents, 0x090,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+/* MMC output and sample clocks are not present on A10 */
+static SUNXI_CCU_PHASE(mmc2_output_clk, "mmc2_output", "mmc2",
+ 0x090, 8, 3, 0);
+static SUNXI_CCU_PHASE(mmc2_sample_clk, "mmc2_sample", "mmc2",
+ 0x090, 20, 3, 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc3_clk, "mmc3", mod0_default_parents, 0x094,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+/* MMC output and sample clocks are not present on A10 */
+static SUNXI_CCU_PHASE(mmc3_output_clk, "mmc3_output", "mmc3",
+ 0x094, 8, 3, 0);
+static SUNXI_CCU_PHASE(mmc3_sample_clk, "mmc3_sample", "mmc3",
+ 0x094, 20, 3, 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(ts_clk, "ts", mod0_default_parents, 0x098,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(ss_clk, "ss", mod0_default_parents, 0x09c,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(spi0_clk, "spi0", mod0_default_parents, 0x0a0,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(spi1_clk, "spi1", mod0_default_parents, 0x0a4,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(spi2_clk, "spi2", mod0_default_parents, 0x0a8,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+/* Undocumented on A10 */
+static SUNXI_CCU_MP_WITH_MUX_GATE(pata_clk, "pata", mod0_default_parents, 0x0ac,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+/* TODO: Check whether A10 actually supports osc32k as 4th parent? */
+static const char *const ir_parents_sun4i[] = { "hosc", "pll-periph",
+ "pll-ddr-other" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(ir0_sun4i_clk, "ir0", ir_parents_sun4i, 0x0b0,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(ir1_sun4i_clk, "ir1", ir_parents_sun4i, 0x0b4,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+static const char *const ir_parents_sun7i[] = { "hosc", "pll-periph",
+ "pll-ddr-other", "osc32k" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(ir0_sun7i_clk, "ir0", ir_parents_sun7i, 0x0b0,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(ir1_sun7i_clk, "ir1", ir_parents_sun7i, 0x0b4,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static const char *const audio_parents[] = { "pll-audio-8x", "pll-audio-4x",
+ "pll-audio-2x", "pll-audio" };
+static SUNXI_CCU_MUX_WITH_GATE(i2s0_clk, "i2s0", audio_parents,
+ 0x0b8, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_MUX_WITH_GATE(ac97_clk, "ac97", audio_parents,
+ 0x0bc, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
+
+/* Undocumented on A10 */
+static SUNXI_CCU_MUX_WITH_GATE(spdif_clk, "spdif", audio_parents,
+ 0x0c0, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
+
+static const char *const keypad_parents[] = { "hosc", "losc"};
+static const u8 keypad_table[] = { 0, 2 };
+static struct ccu_mp keypad_clk = {
+ .enable = BIT(31),
+ .m = _SUNXI_CCU_DIV(0, 5),
+ .p = _SUNXI_CCU_DIV(16, 2),
+ .mux = _SUNXI_CCU_MUX_TABLE(24, 2, keypad_table),
+ .common = {
+ .reg = 0x0c4,
+ .hw.init = CLK_HW_INIT_PARENTS("keypad",
+ keypad_parents,
+ &ccu_mp_ops,
+ 0),
+ },
+};
+
+/*
+ * SATA supports external clock as parent via BIT(24) and is probably an
+ * optional crystal or oscillator that can be connected to the
+ * SATA-CLKM / SATA-CLKP pins.
+ */
+static const char *const sata_parents[] = {"pll-periph-sata", "sata-ext"};
+static SUNXI_CCU_MUX_WITH_GATE(sata_clk, "sata", sata_parents,
+ 0x0c8, 24, 1, BIT(31), CLK_SET_RATE_PARENT);
+
+
+static SUNXI_CCU_GATE(usb_ohci0_clk, "usb-ohci0", "pll-periph",
+ 0x0cc, BIT(6), 0);
+static SUNXI_CCU_GATE(usb_ohci1_clk, "usb-ohci1", "pll-periph",
+ 0x0cc, BIT(7), 0);
+static SUNXI_CCU_GATE(usb_phy_clk, "usb-phy", "pll-periph",
+ 0x0cc, BIT(8), 0);
+
+/* TODO: GPS CLK 0x0d0 */
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(spi3_clk, "spi3", mod0_default_parents, 0x0d4,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+/* Not present on A10 */
+static SUNXI_CCU_MUX_WITH_GATE(i2s1_clk, "i2s1", audio_parents,
+ 0x0d8, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
+
+/* Not present on A10 */
+static SUNXI_CCU_MUX_WITH_GATE(i2s2_clk, "i2s2", audio_parents,
+ 0x0dc, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_GATE(dram_ve_clk, "dram-ve", "pll-ddr",
+ 0x100, BIT(0), 0);
+static SUNXI_CCU_GATE(dram_csi0_clk, "dram-csi0", "pll-ddr",
+ 0x100, BIT(1), 0);
+static SUNXI_CCU_GATE(dram_csi1_clk, "dram-csi1", "pll-ddr",
+ 0x100, BIT(2), 0);
+static SUNXI_CCU_GATE(dram_ts_clk, "dram-ts", "pll-ddr",
+ 0x100, BIT(3), 0);
+static SUNXI_CCU_GATE(dram_tvd_clk, "dram-tvd", "pll-ddr",
+ 0x100, BIT(4), 0);
+static SUNXI_CCU_GATE(dram_tve0_clk, "dram-tve0", "pll-ddr",
+ 0x100, BIT(5), 0);
+static SUNXI_CCU_GATE(dram_tve1_clk, "dram-tve1", "pll-ddr",
+ 0x100, BIT(6), 0);
+
+/* Clock seems to be critical only on sun4i */
+static SUNXI_CCU_GATE(dram_out_clk, "dram-out", "pll-ddr",
+ 0x100, BIT(15), CLK_IS_CRITICAL);
+static SUNXI_CCU_GATE(dram_de_fe1_clk, "dram-de-fe1", "pll-ddr",
+ 0x100, BIT(24), 0);
+static SUNXI_CCU_GATE(dram_de_fe0_clk, "dram-de-fe0", "pll-ddr",
+ 0x100, BIT(25), 0);
+static SUNXI_CCU_GATE(dram_de_be0_clk, "dram-de-be0", "pll-ddr",
+ 0x100, BIT(26), 0);
+static SUNXI_CCU_GATE(dram_de_be1_clk, "dram-de-be1", "pll-ddr",
+ 0x100, BIT(27), 0);
+static SUNXI_CCU_GATE(dram_mp_clk, "dram-mp", "pll-ddr",
+ 0x100, BIT(28), 0);
+static SUNXI_CCU_GATE(dram_ace_clk, "dram-ace", "pll-ddr",
+ 0x100, BIT(29), 0);
+
+static const char *const de_parents[] = { "pll-video0", "pll-video1",
+ "pll-ddr-other" };
+static SUNXI_CCU_M_WITH_MUX_GATE(de_be0_clk, "de-be0", de_parents,
+ 0x104, 0, 4, 24, 2, BIT(31), 0);
+
+static SUNXI_CCU_M_WITH_MUX_GATE(de_be1_clk, "de-be1", de_parents,
+ 0x108, 0, 4, 24, 2, BIT(31), 0);
+
+static SUNXI_CCU_M_WITH_MUX_GATE(de_fe0_clk, "de-fe0", de_parents,
+ 0x10c, 0, 4, 24, 2, BIT(31), 0);
+
+static SUNXI_CCU_M_WITH_MUX_GATE(de_fe1_clk, "de-fe1", de_parents,
+ 0x110, 0, 4, 24, 2, BIT(31), 0);
+
+/* Undocumented on A10 */
+static SUNXI_CCU_M_WITH_MUX_GATE(de_mp_clk, "de-mp", de_parents,
+ 0x114, 0, 4, 24, 2, BIT(31), 0);
+
+static const char *const tcon_parents[] = { "pll-video0", "pll-video1",
+ "pll-video0-2x", "pll-video1-2x" };
+static SUNXI_CCU_MUX_WITH_GATE(tcon0_ch0_clk, "tcon0-ch0-sclk", tcon_parents,
+ 0x118, 24, 2, BIT(31), CLK_SET_RATE_PARENT);
+static SUNXI_CCU_MUX_WITH_GATE(tcon1_ch0_clk, "tcon1-ch0-sclk", tcon_parents,
+ 0x11c, 24, 2, BIT(31), CLK_SET_RATE_PARENT);
+
+static const char *const csi_sclk_parents[] = { "pll-video0", "pll-ve",
+ "pll-ddr-other", "pll-periph" };
+
+static SUNXI_CCU_M_WITH_MUX_GATE(csi_sclk_clk, "csi-sclk",
+ csi_sclk_parents,
+ 0x120, 0, 4, 24, 2, BIT(31), 0);
+
+/* TVD clock setup for A10 */
+static const char *const tvd_parents[] = { "pll-video0", "pll-video1" };
+static SUNXI_CCU_MUX_WITH_GATE(tvd_sun4i_clk, "tvd", tvd_parents,
+ 0x128, 24, 1, BIT(31), 0);
+
+/* TVD clock setup for A20 */
+static SUNXI_CCU_MP_WITH_MUX_GATE(tvd_sclk2_sun7i_clk,
+ "tvd-sclk2", tvd_parents,
+ 0x128,
+ 0, 4, /* M */
+ 16, 4, /* P */
+ 8, 1, /* mux */
+ BIT(15), /* gate */
+ 0);
+static SUNXI_CCU_M_WITH_GATE(tvd_sclk1_sun7i_clk, "tvd-sclk1", "tvd-sclk2",
+ 0x128, 0, 4, BIT(31), 0);
+
+static SUNXI_CCU_M_WITH_MUX_GATE(tcon0_ch1_sclk2_clk, "tcon0-ch1-sclk2",
+ tcon_parents,
+ 0x12c, 0, 4, 24, 2, BIT(31),
+ CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_M_WITH_GATE(tcon0_ch1_clk,
+ "tcon0-ch1-sclk1", "tcon0-ch1-sclk2",
+ 0x12c, 11, 1, BIT(15),
+ CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_M_WITH_MUX_GATE(tcon1_ch1_sclk2_clk, "tcon1-ch1-sclk2",
+ tcon_parents,
+ 0x130, 0, 4, 24, 2, BIT(31),
+ CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_M_WITH_GATE(tcon1_ch1_clk,
+ "tcon1-ch1-sclk1", "tcon1-ch1-sclk2",
+ 0x130, 11, 1, BIT(15),
+ CLK_SET_RATE_PARENT);
+
+static const char *const csi_parents[] = { "hosc", "pll-video0", "pll-video1",
+ "pll-video0-2x", "pll-video1-2x"};
+static const u8 csi_table[] = { 0, 1, 2, 5, 6};
+static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(csi0_clk, "csi0",
+ csi_parents, csi_table,
+ 0x134, 0, 5, 24, 3, BIT(31), 0);
+
+static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(csi1_clk, "csi1",
+ csi_parents, csi_table,
+ 0x138, 0, 5, 24, 3, BIT(31), 0);
+
+static SUNXI_CCU_M_WITH_GATE(ve_clk, "ve", "pll-ve", 0x13c, 16, 8, BIT(31), 0);
+
+static SUNXI_CCU_GATE(codec_clk, "codec", "pll-audio",
+ 0x140, BIT(31), CLK_SET_RATE_PARENT);
+static SUNXI_CCU_GATE(avs_clk, "avs", "hosc", 0x144, BIT(31), 0);
+
+static const char *const ace_parents[] = { "pll-ve", "pll-ddr-other" };
+static SUNXI_CCU_M_WITH_MUX_GATE(ace_clk, "ace", ace_parents,
+ 0x148, 0, 4, 24, 1, BIT(31), 0);
+
+static const char *const hdmi_parents[] = { "pll-video0", "pll-video0-2x",
+ "pll-video1", "pll-video1-2x" };
+static SUNXI_CCU_M_WITH_MUX_GATE(hdmi_clk, "hdmi", hdmi_parents,
+ 0x150, 0, 4, 24, 2, BIT(31), 0);
+
+static const char *const gpu_parents_sun4i[] = { "pll-video0", "pll-ve",
+ "pll-ddr-other",
+ "pll-video1" };
+static SUNXI_CCU_M_WITH_MUX_GATE(gpu_sun4i_clk, "gpu", gpu_parents_sun4i,
+ 0x154, 0, 4, 24, 2, BIT(31), 0);
+
+static const char *const gpu_parents_sun7i[] = { "pll-video0", "pll-ve",
+ "pll-ddr-other", "pll-video1",
+ "pll-gpu" };
+static const u8 gpu_table_sun7i[] = { 0, 1, 2, 3, 4 };
+static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(gpu_sun7i_clk, "gpu",
+ gpu_parents_sun7i, gpu_table_sun7i,
+ 0x154, 0, 4, 24, 3, BIT(31), 0);
+
+static const char *const mbus_sun4i_parents[] = { "hosc", "pll-periph",
+ "pll-ddr-other" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(mbus_sun4i_clk, "mbus", mbus_sun4i_parents,
+ 0x15c, 0, 4, 16, 2, 24, 2, BIT(31),
+ 0);
+static const char *const mbus_sun7i_parents[] = { "hosc", "pll-periph-base",
+ "pll-ddr-other" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(mbus_sun7i_clk, "mbus", mbus_sun7i_parents,
+ 0x15c, 0, 4, 16, 2, 24, 2, BIT(31),
+ CLK_IS_CRITICAL);
+
+static SUNXI_CCU_GATE(hdmi1_slow_clk, "hdmi1-slow", "hosc", 0x178, BIT(31), 0);
+
+static const char *const hdmi1_parents[] = { "pll-video0", "pll-video1" };
+static const u8 hdmi1_table[] = { 0, 1};
+static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(hdmi1_clk, "hdmi1",
+ hdmi1_parents, hdmi1_table,
+ 0x17c, 0, 4, 24, 2, BIT(31), 0);
+
+static const char *const out_parents[] = { "hosc", "osc32k", "hosc" };
+static const struct ccu_mux_fixed_prediv clk_out_predivs[] = {
+ { .index = 0, .div = 750, },
+};
+
+static struct ccu_mp out_a_clk = {
+ .enable = BIT(31),
+ .m = _SUNXI_CCU_DIV(8, 5),
+ .p = _SUNXI_CCU_DIV(20, 2),
+ .mux = {
+ .shift = 24,
+ .width = 2,
+ .fixed_predivs = clk_out_predivs,
+ .n_predivs = ARRAY_SIZE(clk_out_predivs),
+ },
+ .common = {
+ .reg = 0x1f0,
+ .features = CCU_FEATURE_FIXED_PREDIV,
+ .hw.init = CLK_HW_INIT_PARENTS("out-a",
+ out_parents,
+ &ccu_mp_ops,
+ 0),
+ },
+};
+static struct ccu_mp out_b_clk = {
+ .enable = BIT(31),
+ .m = _SUNXI_CCU_DIV(8, 5),
+ .p = _SUNXI_CCU_DIV(20, 2),
+ .mux = {
+ .shift = 24,
+ .width = 2,
+ .fixed_predivs = clk_out_predivs,
+ .n_predivs = ARRAY_SIZE(clk_out_predivs),
+ },
+ .common = {
+ .reg = 0x1f4,
+ .features = CCU_FEATURE_FIXED_PREDIV,
+ .hw.init = CLK_HW_INIT_PARENTS("out-b",
+ out_parents,
+ &ccu_mp_ops,
+ 0),
+ },
+};
+
+static struct ccu_common *sun4i_sun7i_ccu_clks[] = {
+ &hosc_clk.common,
+ &pll_core_clk.common,
+ &pll_audio_base_clk.common,
+ &pll_video0_clk.common,
+ &pll_ve_sun4i_clk.common,
+ &pll_ve_sun7i_clk.common,
+ &pll_ddr_base_clk.common,
+ &pll_ddr_clk.common,
+ &pll_ddr_other_clk.common,
+ &pll_periph_base_clk.common,
+ &pll_periph_sata_clk.common,
+ &pll_video1_clk.common,
+ &pll_gpu_clk.common,
+ &cpu_clk.common,
+ &axi_clk.common,
+ &axi_dram_clk.common,
+ &ahb_sun4i_clk.common,
+ &ahb_sun7i_clk.common,
+ &apb0_clk.common,
+ &apb1_clk.common,
+ &ahb_otg_clk.common,
+ &ahb_ehci0_clk.common,
+ &ahb_ohci0_clk.common,
+ &ahb_ehci1_clk.common,
+ &ahb_ohci1_clk.common,
+ &ahb_ss_clk.common,
+ &ahb_dma_clk.common,
+ &ahb_bist_clk.common,
+ &ahb_mmc0_clk.common,
+ &ahb_mmc1_clk.common,
+ &ahb_mmc2_clk.common,
+ &ahb_mmc3_clk.common,
+ &ahb_ms_clk.common,
+ &ahb_nand_clk.common,
+ &ahb_sdram_clk.common,
+ &ahb_ace_clk.common,
+ &ahb_emac_clk.common,
+ &ahb_ts_clk.common,
+ &ahb_spi0_clk.common,
+ &ahb_spi1_clk.common,
+ &ahb_spi2_clk.common,
+ &ahb_spi3_clk.common,
+ &ahb_pata_clk.common,
+ &ahb_sata_clk.common,
+ &ahb_gps_clk.common,
+ &ahb_hstimer_clk.common,
+ &ahb_ve_clk.common,
+ &ahb_tvd_clk.common,
+ &ahb_tve0_clk.common,
+ &ahb_tve1_clk.common,
+ &ahb_lcd0_clk.common,
+ &ahb_lcd1_clk.common,
+ &ahb_csi0_clk.common,
+ &ahb_csi1_clk.common,
+ &ahb_hdmi1_clk.common,
+ &ahb_hdmi0_clk.common,
+ &ahb_de_be0_clk.common,
+ &ahb_de_be1_clk.common,
+ &ahb_de_fe0_clk.common,
+ &ahb_de_fe1_clk.common,
+ &ahb_gmac_clk.common,
+ &ahb_mp_clk.common,
+ &ahb_gpu_clk.common,
+ &apb0_codec_clk.common,
+ &apb0_spdif_clk.common,
+ &apb0_ac97_clk.common,
+ &apb0_i2s0_clk.common,
+ &apb0_i2s1_clk.common,
+ &apb0_pio_clk.common,
+ &apb0_ir0_clk.common,
+ &apb0_ir1_clk.common,
+ &apb0_i2s2_clk.common,
+ &apb0_keypad_clk.common,
+ &apb1_i2c0_clk.common,
+ &apb1_i2c1_clk.common,
+ &apb1_i2c2_clk.common,
+ &apb1_i2c3_clk.common,
+ &apb1_can_clk.common,
+ &apb1_scr_clk.common,
+ &apb1_ps20_clk.common,
+ &apb1_ps21_clk.common,
+ &apb1_i2c4_clk.common,
+ &apb1_uart0_clk.common,
+ &apb1_uart1_clk.common,
+ &apb1_uart2_clk.common,
+ &apb1_uart3_clk.common,
+ &apb1_uart4_clk.common,
+ &apb1_uart5_clk.common,
+ &apb1_uart6_clk.common,
+ &apb1_uart7_clk.common,
+ &nand_clk.common,
+ &ms_clk.common,
+ &mmc0_clk.common,
+ &mmc0_output_clk.common,
+ &mmc0_sample_clk.common,
+ &mmc1_clk.common,
+ &mmc1_output_clk.common,
+ &mmc1_sample_clk.common,
+ &mmc2_clk.common,
+ &mmc2_output_clk.common,
+ &mmc2_sample_clk.common,
+ &mmc3_clk.common,
+ &mmc3_output_clk.common,
+ &mmc3_sample_clk.common,
+ &ts_clk.common,
+ &ss_clk.common,
+ &spi0_clk.common,
+ &spi1_clk.common,
+ &spi2_clk.common,
+ &pata_clk.common,
+ &ir0_sun4i_clk.common,
+ &ir1_sun4i_clk.common,
+ &ir0_sun7i_clk.common,
+ &ir1_sun7i_clk.common,
+ &i2s0_clk.common,
+ &ac97_clk.common,
+ &spdif_clk.common,
+ &keypad_clk.common,
+ &sata_clk.common,
+ &usb_ohci0_clk.common,
+ &usb_ohci1_clk.common,
+ &usb_phy_clk.common,
+ &spi3_clk.common,
+ &i2s1_clk.common,
+ &i2s2_clk.common,
+ &dram_ve_clk.common,
+ &dram_csi0_clk.common,
+ &dram_csi1_clk.common,
+ &dram_ts_clk.common,
+ &dram_tvd_clk.common,
+ &dram_tve0_clk.common,
+ &dram_tve1_clk.common,
+ &dram_out_clk.common,
+ &dram_de_fe1_clk.common,
+ &dram_de_fe0_clk.common,
+ &dram_de_be0_clk.common,
+ &dram_de_be1_clk.common,
+ &dram_mp_clk.common,
+ &dram_ace_clk.common,
+ &de_be0_clk.common,
+ &de_be1_clk.common,
+ &de_fe0_clk.common,
+ &de_fe1_clk.common,
+ &de_mp_clk.common,
+ &tcon0_ch0_clk.common,
+ &tcon1_ch0_clk.common,
+ &csi_sclk_clk.common,
+ &tvd_sun4i_clk.common,
+ &tvd_sclk1_sun7i_clk.common,
+ &tvd_sclk2_sun7i_clk.common,
+ &tcon0_ch1_sclk2_clk.common,
+ &tcon0_ch1_clk.common,
+ &tcon1_ch1_sclk2_clk.common,
+ &tcon1_ch1_clk.common,
+ &csi0_clk.common,
+ &csi1_clk.common,
+ &ve_clk.common,
+ &codec_clk.common,
+ &avs_clk.common,
+ &ace_clk.common,
+ &hdmi_clk.common,
+ &gpu_sun4i_clk.common,
+ &gpu_sun7i_clk.common,
+ &mbus_sun4i_clk.common,
+ &mbus_sun7i_clk.common,
+ &hdmi1_slow_clk.common,
+ &hdmi1_clk.common,
+ &out_a_clk.common,
+ &out_b_clk.common
+};
+
+/* Post-divider for pll-audio is hardcoded to 4 */
+static CLK_FIXED_FACTOR(pll_audio_clk, "pll-audio",
+ "pll-audio-base", 4, 1, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_audio_2x_clk, "pll-audio-2x",
+ "pll-audio-base", 2, 1, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_audio_4x_clk, "pll-audio-4x",
+ "pll-audio-base", 1, 1, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_audio_8x_clk, "pll-audio-8x",
+ "pll-audio-base", 1, 2, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_video0_2x_clk, "pll-video0-2x",
+ "pll-video0", 1, 2, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_video1_2x_clk, "pll-video1-2x",
+ "pll-video1", 1, 2, CLK_SET_RATE_PARENT);
+
+
+static struct clk_hw_onecell_data sun4i_a10_hw_clks = {
+ .hws = {
+ [CLK_HOSC] = &hosc_clk.common.hw,
+ [CLK_PLL_CORE] = &pll_core_clk.common.hw,
+ [CLK_PLL_AUDIO_BASE] = &pll_audio_base_clk.common.hw,
+ [CLK_PLL_AUDIO] = &pll_audio_clk.hw,
+ [CLK_PLL_AUDIO_2X] = &pll_audio_2x_clk.hw,
+ [CLK_PLL_AUDIO_4X] = &pll_audio_4x_clk.hw,
+ [CLK_PLL_AUDIO_8X] = &pll_audio_8x_clk.hw,
+ [CLK_PLL_VIDEO0] = &pll_video0_clk.common.hw,
+ [CLK_PLL_VIDEO0_2X] = &pll_video0_2x_clk.hw,
+ [CLK_PLL_VE] = &pll_ve_sun4i_clk.common.hw,
+ [CLK_PLL_DDR_BASE] = &pll_ddr_base_clk.common.hw,
+ [CLK_PLL_DDR] = &pll_ddr_clk.common.hw,
+ [CLK_PLL_DDR_OTHER] = &pll_ddr_other_clk.common.hw,
+ [CLK_PLL_PERIPH_BASE] = &pll_periph_base_clk.common.hw,
+ [CLK_PLL_PERIPH] = &pll_periph_clk.hw,
+ [CLK_PLL_PERIPH_SATA] = &pll_periph_sata_clk.common.hw,
+ [CLK_PLL_VIDEO1] = &pll_video1_clk.common.hw,
+ [CLK_PLL_VIDEO1_2X] = &pll_video1_2x_clk.hw,
+ [CLK_CPU] = &cpu_clk.common.hw,
+ [CLK_AXI] = &axi_clk.common.hw,
+ [CLK_AXI_DRAM] = &axi_dram_clk.common.hw,
+ [CLK_AHB] = &ahb_sun4i_clk.common.hw,
+ [CLK_APB0] = &apb0_clk.common.hw,
+ [CLK_APB1] = &apb1_clk.common.hw,
+ [CLK_AHB_OTG] = &ahb_otg_clk.common.hw,
+ [CLK_AHB_EHCI0] = &ahb_ehci0_clk.common.hw,
+ [CLK_AHB_OHCI0] = &ahb_ohci0_clk.common.hw,
+ [CLK_AHB_EHCI1] = &ahb_ehci1_clk.common.hw,
+ [CLK_AHB_OHCI1] = &ahb_ohci1_clk.common.hw,
+ [CLK_AHB_SS] = &ahb_ss_clk.common.hw,
+ [CLK_AHB_DMA] = &ahb_dma_clk.common.hw,
+ [CLK_AHB_BIST] = &ahb_bist_clk.common.hw,
+ [CLK_AHB_MMC0] = &ahb_mmc0_clk.common.hw,
+ [CLK_AHB_MMC1] = &ahb_mmc1_clk.common.hw,
+ [CLK_AHB_MMC2] = &ahb_mmc2_clk.common.hw,
+ [CLK_AHB_MMC3] = &ahb_mmc3_clk.common.hw,
+ [CLK_AHB_MS] = &ahb_ms_clk.common.hw,
+ [CLK_AHB_NAND] = &ahb_nand_clk.common.hw,
+ [CLK_AHB_SDRAM] = &ahb_sdram_clk.common.hw,
+ [CLK_AHB_ACE] = &ahb_ace_clk.common.hw,
+ [CLK_AHB_EMAC] = &ahb_emac_clk.common.hw,
+ [CLK_AHB_TS] = &ahb_ts_clk.common.hw,
+ [CLK_AHB_SPI0] = &ahb_spi0_clk.common.hw,
+ [CLK_AHB_SPI1] = &ahb_spi1_clk.common.hw,
+ [CLK_AHB_SPI2] = &ahb_spi2_clk.common.hw,
+ [CLK_AHB_SPI3] = &ahb_spi3_clk.common.hw,
+ [CLK_AHB_PATA] = &ahb_pata_clk.common.hw,
+ [CLK_AHB_SATA] = &ahb_sata_clk.common.hw,
+ [CLK_AHB_GPS] = &ahb_gps_clk.common.hw,
+ [CLK_AHB_VE] = &ahb_ve_clk.common.hw,
+ [CLK_AHB_TVD] = &ahb_tvd_clk.common.hw,
+ [CLK_AHB_TVE0] = &ahb_tve0_clk.common.hw,
+ [CLK_AHB_TVE1] = &ahb_tve1_clk.common.hw,
+ [CLK_AHB_LCD0] = &ahb_lcd0_clk.common.hw,
+ [CLK_AHB_LCD1] = &ahb_lcd1_clk.common.hw,
+ [CLK_AHB_CSI0] = &ahb_csi0_clk.common.hw,
+ [CLK_AHB_CSI1] = &ahb_csi1_clk.common.hw,
+ [CLK_AHB_HDMI0] = &ahb_hdmi0_clk.common.hw,
+ [CLK_AHB_DE_BE0] = &ahb_de_be0_clk.common.hw,
+ [CLK_AHB_DE_BE1] = &ahb_de_be1_clk.common.hw,
+ [CLK_AHB_DE_FE0] = &ahb_de_fe0_clk.common.hw,
+ [CLK_AHB_DE_FE1] = &ahb_de_fe1_clk.common.hw,
+ [CLK_AHB_MP] = &ahb_mp_clk.common.hw,
+ [CLK_AHB_GPU] = &ahb_gpu_clk.common.hw,
+ [CLK_APB0_CODEC] = &apb0_codec_clk.common.hw,
+ [CLK_APB0_SPDIF] = &apb0_spdif_clk.common.hw,
+ [CLK_APB0_AC97] = &apb0_ac97_clk.common.hw,
+ [CLK_APB0_I2S0] = &apb0_i2s0_clk.common.hw,
+ [CLK_APB0_PIO] = &apb0_pio_clk.common.hw,
+ [CLK_APB0_IR0] = &apb0_ir0_clk.common.hw,
+ [CLK_APB0_IR1] = &apb0_ir1_clk.common.hw,
+ [CLK_APB0_KEYPAD] = &apb0_keypad_clk.common.hw,
+ [CLK_APB1_I2C0] = &apb1_i2c0_clk.common.hw,
+ [CLK_APB1_I2C1] = &apb1_i2c1_clk.common.hw,
+ [CLK_APB1_I2C2] = &apb1_i2c2_clk.common.hw,
+ [CLK_APB1_CAN] = &apb1_can_clk.common.hw,
+ [CLK_APB1_SCR] = &apb1_scr_clk.common.hw,
+ [CLK_APB1_PS20] = &apb1_ps20_clk.common.hw,
+ [CLK_APB1_PS21] = &apb1_ps21_clk.common.hw,
+ [CLK_APB1_UART0] = &apb1_uart0_clk.common.hw,
+ [CLK_APB1_UART1] = &apb1_uart1_clk.common.hw,
+ [CLK_APB1_UART2] = &apb1_uart2_clk.common.hw,
+ [CLK_APB1_UART3] = &apb1_uart3_clk.common.hw,
+ [CLK_APB1_UART4] = &apb1_uart4_clk.common.hw,
+ [CLK_APB1_UART5] = &apb1_uart5_clk.common.hw,
+ [CLK_APB1_UART6] = &apb1_uart6_clk.common.hw,
+ [CLK_APB1_UART7] = &apb1_uart7_clk.common.hw,
+ [CLK_NAND] = &nand_clk.common.hw,
+ [CLK_MS] = &ms_clk.common.hw,
+ [CLK_MMC0] = &mmc0_clk.common.hw,
+ [CLK_MMC1] = &mmc1_clk.common.hw,
+ [CLK_MMC2] = &mmc2_clk.common.hw,
+ [CLK_MMC3] = &mmc3_clk.common.hw,
+ [CLK_TS] = &ts_clk.common.hw,
+ [CLK_SS] = &ss_clk.common.hw,
+ [CLK_SPI0] = &spi0_clk.common.hw,
+ [CLK_SPI1] = &spi1_clk.common.hw,
+ [CLK_SPI2] = &spi2_clk.common.hw,
+ [CLK_PATA] = &pata_clk.common.hw,
+ [CLK_IR0] = &ir0_sun4i_clk.common.hw,
+ [CLK_IR1] = &ir1_sun4i_clk.common.hw,
+ [CLK_I2S0] = &i2s0_clk.common.hw,
+ [CLK_AC97] = &ac97_clk.common.hw,
+ [CLK_SPDIF] = &spdif_clk.common.hw,
+ [CLK_KEYPAD] = &keypad_clk.common.hw,
+ [CLK_SATA] = &sata_clk.common.hw,
+ [CLK_USB_OHCI0] = &usb_ohci0_clk.common.hw,
+ [CLK_USB_OHCI1] = &usb_ohci1_clk.common.hw,
+ [CLK_USB_PHY] = &usb_phy_clk.common.hw,
+ /* CLK_GPS is unimplemented */
+ [CLK_SPI3] = &spi3_clk.common.hw,
+ [CLK_DRAM_VE] = &dram_ve_clk.common.hw,
+ [CLK_DRAM_CSI0] = &dram_csi0_clk.common.hw,
+ [CLK_DRAM_CSI1] = &dram_csi1_clk.common.hw,
+ [CLK_DRAM_TS] = &dram_ts_clk.common.hw,
+ [CLK_DRAM_TVD] = &dram_tvd_clk.common.hw,
+ [CLK_DRAM_TVE0] = &dram_tve0_clk.common.hw,
+ [CLK_DRAM_TVE1] = &dram_tve1_clk.common.hw,
+ [CLK_DRAM_OUT] = &dram_out_clk.common.hw,
+ [CLK_DRAM_DE_FE1] = &dram_de_fe1_clk.common.hw,
+ [CLK_DRAM_DE_FE0] = &dram_de_fe0_clk.common.hw,
+ [CLK_DRAM_DE_BE0] = &dram_de_be0_clk.common.hw,
+ [CLK_DRAM_DE_BE1] = &dram_de_be1_clk.common.hw,
+ [CLK_DRAM_MP] = &dram_mp_clk.common.hw,
+ [CLK_DRAM_ACE] = &dram_ace_clk.common.hw,
+ [CLK_DE_BE0] = &de_be0_clk.common.hw,
+ [CLK_DE_BE1] = &de_be1_clk.common.hw,
+ [CLK_DE_FE0] = &de_fe0_clk.common.hw,
+ [CLK_DE_FE1] = &de_fe1_clk.common.hw,
+ [CLK_DE_MP] = &de_mp_clk.common.hw,
+ [CLK_TCON0_CH0] = &tcon0_ch0_clk.common.hw,
+ [CLK_TCON1_CH0] = &tcon1_ch0_clk.common.hw,
+ [CLK_CSI_SCLK] = &csi_sclk_clk.common.hw,
+ [CLK_TVD] = &tvd_sun4i_clk.common.hw,
+ [CLK_TCON0_CH1_SCLK2] = &tcon0_ch1_sclk2_clk.common.hw,
+ [CLK_TCON0_CH1] = &tcon0_ch1_clk.common.hw,
+ [CLK_TCON1_CH1_SCLK2] = &tcon1_ch1_sclk2_clk.common.hw,
+ [CLK_TCON1_CH1] = &tcon1_ch1_clk.common.hw,
+ [CLK_CSI0] = &csi0_clk.common.hw,
+ [CLK_CSI1] = &csi1_clk.common.hw,
+ [CLK_VE] = &ve_clk.common.hw,
+ [CLK_CODEC] = &codec_clk.common.hw,
+ [CLK_AVS] = &avs_clk.common.hw,
+ [CLK_ACE] = &ace_clk.common.hw,
+ [CLK_HDMI] = &hdmi_clk.common.hw,
+ [CLK_GPU] = &gpu_sun7i_clk.common.hw,
+ [CLK_MBUS] = &mbus_sun4i_clk.common.hw,
+ },
+ .num = CLK_NUMBER_SUN4I,
+};
+static struct clk_hw_onecell_data sun7i_a20_hw_clks = {
+ .hws = {
+ [CLK_HOSC] = &hosc_clk.common.hw,
+ [CLK_PLL_CORE] = &pll_core_clk.common.hw,
+ [CLK_PLL_AUDIO_BASE] = &pll_audio_base_clk.common.hw,
+ [CLK_PLL_AUDIO] = &pll_audio_clk.hw,
+ [CLK_PLL_AUDIO_2X] = &pll_audio_2x_clk.hw,
+ [CLK_PLL_AUDIO_4X] = &pll_audio_4x_clk.hw,
+ [CLK_PLL_AUDIO_8X] = &pll_audio_8x_clk.hw,
+ [CLK_PLL_VIDEO0] = &pll_video0_clk.common.hw,
+ [CLK_PLL_VIDEO0_2X] = &pll_video0_2x_clk.hw,
+ [CLK_PLL_VE] = &pll_ve_sun7i_clk.common.hw,
+ [CLK_PLL_DDR_BASE] = &pll_ddr_base_clk.common.hw,
+ [CLK_PLL_DDR] = &pll_ddr_clk.common.hw,
+ [CLK_PLL_DDR_OTHER] = &pll_ddr_other_clk.common.hw,
+ [CLK_PLL_PERIPH_BASE] = &pll_periph_base_clk.common.hw,
+ [CLK_PLL_PERIPH] = &pll_periph_clk.hw,
+ [CLK_PLL_PERIPH_SATA] = &pll_periph_sata_clk.common.hw,
+ [CLK_PLL_VIDEO1] = &pll_video1_clk.common.hw,
+ [CLK_PLL_VIDEO1_2X] = &pll_video1_2x_clk.hw,
+ [CLK_PLL_GPU] = &pll_gpu_clk.common.hw,
+ [CLK_CPU] = &cpu_clk.common.hw,
+ [CLK_AXI] = &axi_clk.common.hw,
+ [CLK_AHB] = &ahb_sun7i_clk.common.hw,
+ [CLK_APB0] = &apb0_clk.common.hw,
+ [CLK_APB1] = &apb1_clk.common.hw,
+ [CLK_AHB_OTG] = &ahb_otg_clk.common.hw,
+ [CLK_AHB_EHCI0] = &ahb_ehci0_clk.common.hw,
+ [CLK_AHB_OHCI0] = &ahb_ohci0_clk.common.hw,
+ [CLK_AHB_EHCI1] = &ahb_ehci1_clk.common.hw,
+ [CLK_AHB_OHCI1] = &ahb_ohci1_clk.common.hw,
+ [CLK_AHB_SS] = &ahb_ss_clk.common.hw,
+ [CLK_AHB_DMA] = &ahb_dma_clk.common.hw,
+ [CLK_AHB_BIST] = &ahb_bist_clk.common.hw,
+ [CLK_AHB_MMC0] = &ahb_mmc0_clk.common.hw,
+ [CLK_AHB_MMC1] = &ahb_mmc1_clk.common.hw,
+ [CLK_AHB_MMC2] = &ahb_mmc2_clk.common.hw,
+ [CLK_AHB_MMC3] = &ahb_mmc3_clk.common.hw,
+ [CLK_AHB_MS] = &ahb_ms_clk.common.hw,
+ [CLK_AHB_NAND] = &ahb_nand_clk.common.hw,
+ [CLK_AHB_SDRAM] = &ahb_sdram_clk.common.hw,
+ [CLK_AHB_ACE] = &ahb_ace_clk.common.hw,
+ [CLK_AHB_EMAC] = &ahb_emac_clk.common.hw,
+ [CLK_AHB_TS] = &ahb_ts_clk.common.hw,
+ [CLK_AHB_SPI0] = &ahb_spi0_clk.common.hw,
+ [CLK_AHB_SPI1] = &ahb_spi1_clk.common.hw,
+ [CLK_AHB_SPI2] = &ahb_spi2_clk.common.hw,
+ [CLK_AHB_SPI3] = &ahb_spi3_clk.common.hw,
+ [CLK_AHB_PATA] = &ahb_pata_clk.common.hw,
+ [CLK_AHB_SATA] = &ahb_sata_clk.common.hw,
+ [CLK_AHB_HSTIMER] = &ahb_hstimer_clk.common.hw,
+ [CLK_AHB_VE] = &ahb_ve_clk.common.hw,
+ [CLK_AHB_TVD] = &ahb_tvd_clk.common.hw,
+ [CLK_AHB_TVE0] = &ahb_tve0_clk.common.hw,
+ [CLK_AHB_TVE1] = &ahb_tve1_clk.common.hw,
+ [CLK_AHB_LCD0] = &ahb_lcd0_clk.common.hw,
+ [CLK_AHB_LCD1] = &ahb_lcd1_clk.common.hw,
+ [CLK_AHB_CSI0] = &ahb_csi0_clk.common.hw,
+ [CLK_AHB_CSI1] = &ahb_csi1_clk.common.hw,
+ [CLK_AHB_HDMI1] = &ahb_hdmi1_clk.common.hw,
+ [CLK_AHB_HDMI0] = &ahb_hdmi0_clk.common.hw,
+ [CLK_AHB_DE_BE0] = &ahb_de_be0_clk.common.hw,
+ [CLK_AHB_DE_BE1] = &ahb_de_be1_clk.common.hw,
+ [CLK_AHB_DE_FE0] = &ahb_de_fe0_clk.common.hw,
+ [CLK_AHB_DE_FE1] = &ahb_de_fe1_clk.common.hw,
+ [CLK_AHB_GMAC] = &ahb_gmac_clk.common.hw,
+ [CLK_AHB_MP] = &ahb_mp_clk.common.hw,
+ [CLK_AHB_GPU] = &ahb_gpu_clk.common.hw,
+ [CLK_APB0_CODEC] = &apb0_codec_clk.common.hw,
+ [CLK_APB0_SPDIF] = &apb0_spdif_clk.common.hw,
+ [CLK_APB0_AC97] = &apb0_ac97_clk.common.hw,
+ [CLK_APB0_I2S0] = &apb0_i2s0_clk.common.hw,
+ [CLK_APB0_I2S1] = &apb0_i2s1_clk.common.hw,
+ [CLK_APB0_PIO] = &apb0_pio_clk.common.hw,
+ [CLK_APB0_IR0] = &apb0_ir0_clk.common.hw,
+ [CLK_APB0_IR1] = &apb0_ir1_clk.common.hw,
+ [CLK_APB0_I2S2] = &apb0_i2s2_clk.common.hw,
+ [CLK_APB0_KEYPAD] = &apb0_keypad_clk.common.hw,
+ [CLK_APB1_I2C0] = &apb1_i2c0_clk.common.hw,
+ [CLK_APB1_I2C1] = &apb1_i2c1_clk.common.hw,
+ [CLK_APB1_I2C2] = &apb1_i2c2_clk.common.hw,
+ [CLK_APB1_I2C3] = &apb1_i2c3_clk.common.hw,
+ [CLK_APB1_CAN] = &apb1_can_clk.common.hw,
+ [CLK_APB1_SCR] = &apb1_scr_clk.common.hw,
+ [CLK_APB1_PS20] = &apb1_ps20_clk.common.hw,
+ [CLK_APB1_PS21] = &apb1_ps21_clk.common.hw,
+ [CLK_APB1_I2C4] = &apb1_i2c4_clk.common.hw,
+ [CLK_APB1_UART0] = &apb1_uart0_clk.common.hw,
+ [CLK_APB1_UART1] = &apb1_uart1_clk.common.hw,
+ [CLK_APB1_UART2] = &apb1_uart2_clk.common.hw,
+ [CLK_APB1_UART3] = &apb1_uart3_clk.common.hw,
+ [CLK_APB1_UART4] = &apb1_uart4_clk.common.hw,
+ [CLK_APB1_UART5] = &apb1_uart5_clk.common.hw,
+ [CLK_APB1_UART6] = &apb1_uart6_clk.common.hw,
+ [CLK_APB1_UART7] = &apb1_uart7_clk.common.hw,
+ [CLK_NAND] = &nand_clk.common.hw,
+ [CLK_MS] = &ms_clk.common.hw,
+ [CLK_MMC0] = &mmc0_clk.common.hw,
+ [CLK_MMC0_OUTPUT] = &mmc0_output_clk.common.hw,
+ [CLK_MMC0_SAMPLE] = &mmc0_sample_clk.common.hw,
+ [CLK_MMC1] = &mmc1_clk.common.hw,
+ [CLK_MMC1_OUTPUT] = &mmc1_output_clk.common.hw,
+ [CLK_MMC1_SAMPLE] = &mmc1_sample_clk.common.hw,
+ [CLK_MMC2] = &mmc2_clk.common.hw,
+ [CLK_MMC2_OUTPUT] = &mmc2_output_clk.common.hw,
+ [CLK_MMC2_SAMPLE] = &mmc2_sample_clk.common.hw,
+ [CLK_MMC3] = &mmc3_clk.common.hw,
+ [CLK_MMC3_OUTPUT] = &mmc3_output_clk.common.hw,
+ [CLK_MMC3_SAMPLE] = &mmc3_sample_clk.common.hw,
+ [CLK_TS] = &ts_clk.common.hw,
+ [CLK_SS] = &ss_clk.common.hw,
+ [CLK_SPI0] = &spi0_clk.common.hw,
+ [CLK_SPI1] = &spi1_clk.common.hw,
+ [CLK_SPI2] = &spi2_clk.common.hw,
+ [CLK_PATA] = &pata_clk.common.hw,
+ [CLK_IR0] = &ir0_sun7i_clk.common.hw,
+ [CLK_IR1] = &ir1_sun7i_clk.common.hw,
+ [CLK_I2S0] = &i2s0_clk.common.hw,
+ [CLK_AC97] = &ac97_clk.common.hw,
+ [CLK_SPDIF] = &spdif_clk.common.hw,
+ [CLK_KEYPAD] = &keypad_clk.common.hw,
+ [CLK_SATA] = &sata_clk.common.hw,
+ [CLK_USB_OHCI0] = &usb_ohci0_clk.common.hw,
+ [CLK_USB_OHCI1] = &usb_ohci1_clk.common.hw,
+ [CLK_USB_PHY] = &usb_phy_clk.common.hw,
+ /* CLK_GPS is unimplemented */
+ [CLK_SPI3] = &spi3_clk.common.hw,
+ [CLK_I2S1] = &i2s1_clk.common.hw,
+ [CLK_I2S2] = &i2s2_clk.common.hw,
+ [CLK_DRAM_VE] = &dram_ve_clk.common.hw,
+ [CLK_DRAM_CSI0] = &dram_csi0_clk.common.hw,
+ [CLK_DRAM_CSI1] = &dram_csi1_clk.common.hw,
+ [CLK_DRAM_TS] = &dram_ts_clk.common.hw,
+ [CLK_DRAM_TVD] = &dram_tvd_clk.common.hw,
+ [CLK_DRAM_TVE0] = &dram_tve0_clk.common.hw,
+ [CLK_DRAM_TVE1] = &dram_tve1_clk.common.hw,
+ [CLK_DRAM_OUT] = &dram_out_clk.common.hw,
+ [CLK_DRAM_DE_FE1] = &dram_de_fe1_clk.common.hw,
+ [CLK_DRAM_DE_FE0] = &dram_de_fe0_clk.common.hw,
+ [CLK_DRAM_DE_BE0] = &dram_de_be0_clk.common.hw,
+ [CLK_DRAM_DE_BE1] = &dram_de_be1_clk.common.hw,
+ [CLK_DRAM_MP] = &dram_mp_clk.common.hw,
+ [CLK_DRAM_ACE] = &dram_ace_clk.common.hw,
+ [CLK_DE_BE0] = &de_be0_clk.common.hw,
+ [CLK_DE_BE1] = &de_be1_clk.common.hw,
+ [CLK_DE_FE0] = &de_fe0_clk.common.hw,
+ [CLK_DE_FE1] = &de_fe1_clk.common.hw,
+ [CLK_DE_MP] = &de_mp_clk.common.hw,
+ [CLK_TCON0_CH0] = &tcon0_ch0_clk.common.hw,
+ [CLK_TCON1_CH0] = &tcon1_ch0_clk.common.hw,
+ [CLK_CSI_SCLK] = &csi_sclk_clk.common.hw,
+ [CLK_TVD_SCLK2] = &tvd_sclk2_sun7i_clk.common.hw,
+ [CLK_TVD] = &tvd_sclk1_sun7i_clk.common.hw,
+ [CLK_TCON0_CH1_SCLK2] = &tcon0_ch1_sclk2_clk.common.hw,
+ [CLK_TCON0_CH1] = &tcon0_ch1_clk.common.hw,
+ [CLK_TCON1_CH1_SCLK2] = &tcon1_ch1_sclk2_clk.common.hw,
+ [CLK_TCON1_CH1] = &tcon1_ch1_clk.common.hw,
+ [CLK_CSI0] = &csi0_clk.common.hw,
+ [CLK_CSI1] = &csi1_clk.common.hw,
+ [CLK_VE] = &ve_clk.common.hw,
+ [CLK_CODEC] = &codec_clk.common.hw,
+ [CLK_AVS] = &avs_clk.common.hw,
+ [CLK_ACE] = &ace_clk.common.hw,
+ [CLK_HDMI] = &hdmi_clk.common.hw,
+ [CLK_GPU] = &gpu_sun7i_clk.common.hw,
+ [CLK_MBUS] = &mbus_sun7i_clk.common.hw,
+ [CLK_HDMI1_SLOW] = &hdmi1_slow_clk.common.hw,
+ [CLK_HDMI1] = &hdmi1_clk.common.hw,
+ [CLK_OUT_A] = &out_a_clk.common.hw,
+ [CLK_OUT_B] = &out_b_clk.common.hw,
+ },
+ .num = CLK_NUMBER_SUN7I,
+};
+
+static struct ccu_reset_map sun7i_a20_ccu_resets[] = {
+ [RST_USB_PHY0] = { 0x0cc, BIT(0) },
+ [RST_USB_PHY1] = { 0x0cc, BIT(1) },
+ [RST_USB_PHY2] = { 0x0cc, BIT(2) },
+ [RST_GPS] = { 0x0d0, BIT(0) },
+ [RST_DE_BE0] = { 0x104, BIT(30) },
+ [RST_DE_BE1] = { 0x108, BIT(30) },
+ [RST_DE_FE0] = { 0x10c, BIT(30) },
+ [RST_DE_FE1] = { 0x110, BIT(30) },
+ [RST_DE_MP] = { 0x114, BIT(30) },
+ [RST_TCON0] = { 0x118, BIT(30) },
+ [RST_TCON1] = { 0x11c, BIT(30) },
+ [RST_CSI0] = { 0x134, BIT(30) },
+ [RST_CSI1] = { 0x138, BIT(30) },
+ [RST_VE] = { 0x13c, BIT(0) },
+ [RST_ACE] = { 0x148, BIT(16) },
+ [RST_LVDS] = { 0x14c, BIT(0) },
+ [RST_GPU] = { 0x154, BIT(30) },
+ [RST_HDMI_H] = { 0x170, BIT(0) },
+ [RST_HDMI_SYS] = { 0x170, BIT(1) },
+ [RST_HDMI_AUDIO_DMA] = { 0x170, BIT(2) },
+};
+
+static const struct sunxi_ccu_desc sun4i_a10_ccu_desc = {
+ .ccu_clks = sun4i_sun7i_ccu_clks,
+ .num_ccu_clks = ARRAY_SIZE(sun4i_sun7i_ccu_clks),
+
+ .hw_clks = &sun4i_a10_hw_clks,
+
+ .resets = sun7i_a20_ccu_resets,
+ .num_resets = ARRAY_SIZE(sun7i_a20_ccu_resets),
+};
+
+static const struct sunxi_ccu_desc sun7i_a20_ccu_desc = {
+ .ccu_clks = sun4i_sun7i_ccu_clks,
+ .num_ccu_clks = ARRAY_SIZE(sun4i_sun7i_ccu_clks),
+
+ .hw_clks = &sun7i_a20_hw_clks,
+
+ .resets = sun7i_a20_ccu_resets,
+ .num_resets = ARRAY_SIZE(sun7i_a20_ccu_resets),
+};
+
+static void __init sun4i_ccu_init(struct device_node *node,
+ const struct sunxi_ccu_desc *desc)
+{
+ void __iomem *reg;
+ u32 val;
+
+ reg = of_io_request_and_map(node, 0, of_node_full_name(node));
+ if (IS_ERR(reg)) {
+ pr_err("%s: Could not map the clock registers\n",
+ of_node_full_name(node));
+ return;
+ }
+
+ /* Force the PLL-Audio-1x divider to 4 */
+ val = readl(reg + SUN4I_PLL_AUDIO_REG);
+ val &= ~GENMASK(19, 16);
+ writel(val | (3 << 16), reg + SUN4I_PLL_AUDIO_REG);
+
+ /*
+ * Use the peripheral PLL6 as the AHB parent, instead of CPU /
+ * AXI which have rate changes due to cpufreq.
+ *
+ * This is especially a big deal for the HS timer whose parent
+ * clock is AHB.
+ */
+ val = readl(reg + SUN4I_AHB_REG);
+ val &= ~GENMASK(7, 6);
+ writel(val | (2 << 6), reg + SUN4I_AHB_REG);
+
+ sunxi_ccu_probe(node, reg, desc);
+}
+
+static void __init sun4i_a10_ccu_setup(struct device_node *node)
+{
+ sun4i_ccu_init(node, &sun4i_a10_ccu_desc);
+}
+CLK_OF_DECLARE(sun4i_a10_ccu, "allwinner,sun4i-a10-ccu",
+ sun4i_a10_ccu_setup);
+
+static void __init sun7i_a20_ccu_setup(struct device_node *node)
+{
+ sun4i_ccu_init(node, &sun7i_a20_ccu_desc);
+}
+CLK_OF_DECLARE(sun7i_a20_ccu, "allwinner,sun7i-a20-ccu",
+ sun7i_a20_ccu_setup);
diff --git a/drivers/clk/sunxi-ng/ccu-sun4i-a10.h b/drivers/clk/sunxi-ng/ccu-sun4i-a10.h
new file mode 100644
index 0000000..c5947c7
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu-sun4i-a10.h
@@ -0,0 +1,61 @@
+/*
+ * Copyright 2017 Priit Laes
+ *
+ * Priit Laes <***@plaes.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _CCU_SUN4I_A10_H_
+#define _CCU_SUN4I_A10_H_
+
+#include <dt-bindings/clock/sun4i-a10-ccu.h>
+#include <dt-bindings/clock/sun7i-a20-ccu.h>
+#include <dt-bindings/reset/sun4i-a10-ccu.h>
+
+/* The HOSC is exported */
+#define CLK_PLL_CORE 2
+#define CLK_PLL_AUDIO_BASE 3
+#define CLK_PLL_AUDIO 4
+#define CLK_PLL_AUDIO_2X 5
+#define CLK_PLL_AUDIO_4X 6
+#define CLK_PLL_AUDIO_8X 7
+#define CLK_PLL_VIDEO0 8
+#define CLK_PLL_VIDEO0_2X 9
+#define CLK_PLL_VE 10
+#define CLK_PLL_DDR_BASE 11
+#define CLK_PLL_DDR 12
+#define CLK_PLL_DDR_OTHER 13
+#define CLK_PLL_PERIPH_BASE 14
+#define CLK_PLL_PERIPH 15
+#define CLK_PLL_PERIPH_SATA 16
+#define CLK_PLL_VIDEO1 17
+#define CLK_PLL_VIDEO1_2X 18
+#define CLK_PLL_GPU 19
+
+/* The CPU clock is exported */
+#define CLK_AXI 21
+#define CLK_AXI_DRAM 22
+#define CLK_AHB 23
+#define CLK_APB0 24
+#define CLK_APB1 25
+
+/* AHB gates are exported (23..68) */
+/* APB0 gates are exported (69..78) */
+/* APB1 gates are exported (79..95) */
+/* IP module clocks are exported (96..128) */
+/* DRAM gates are exported (129..142)*/
+/* Media (display engine clocks & etc) are exported (143..169) */
+
+#define CLK_NUMBER_SUN4I (CLK_MBUS + 1)
+#define CLK_NUMBER_SUN7I (CLK_OUT_B + 1)
+
+#endif /* _CCU_SUN4I_A10_H_ */
diff --git a/include/dt-bindings/clock/sun4i-a10-ccu.h b/include/dt-bindings/clock/sun4i-a10-ccu.h
new file mode 100644
index 0000000..c5a53f3
--- /dev/null
+++ b/include/dt-bindings/clock/sun4i-a10-ccu.h
@@ -0,0 +1,200 @@
+/*
+ * Copyright (C) 2017 Priit Laes <***@plaes.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _DT_BINDINGS_CLK_SUN4I_A10_H_
+#define _DT_BINDINGS_CLK_SUN4I_A10_H_
+
+#define CLK_HOSC 1
+#define CLK_CPU 20
+
+/* AHB Gates */
+#define CLK_AHB_OTG 26
+#define CLK_AHB_EHCI0 27
+#define CLK_AHB_OHCI0 28
+#define CLK_AHB_EHCI1 29
+#define CLK_AHB_OHCI1 30
+#define CLK_AHB_SS 31
+#define CLK_AHB_DMA 32
+#define CLK_AHB_BIST 33
+#define CLK_AHB_MMC0 34
+#define CLK_AHB_MMC1 35
+#define CLK_AHB_MMC2 36
+#define CLK_AHB_MMC3 37
+#define CLK_AHB_MS 38
+#define CLK_AHB_NAND 39
+#define CLK_AHB_SDRAM 40
+#define CLK_AHB_ACE 41
+#define CLK_AHB_EMAC 42
+#define CLK_AHB_TS 43
+#define CLK_AHB_SPI0 44
+#define CLK_AHB_SPI1 45
+#define CLK_AHB_SPI2 46
+#define CLK_AHB_SPI3 47
+#define CLK_AHB_PATA 48
+#define CLK_AHB_SATA 49
+#define CLK_AHB_GPS 50
+#define CLK_AHB_HSTIMER 51
+#define CLK_AHB_VE 52
+#define CLK_AHB_TVD 53
+#define CLK_AHB_TVE0 54
+#define CLK_AHB_TVE1 55
+#define CLK_AHB_LCD0 56
+#define CLK_AHB_LCD1 57
+#define CLK_AHB_CSI0 58
+#define CLK_AHB_CSI1 59
+#define CLK_AHB_HDMI0 60
+#define CLK_AHB_HDMI1 61
+#define CLK_AHB_DE_BE0 62
+#define CLK_AHB_DE_BE1 63
+#define CLK_AHB_DE_FE0 64
+#define CLK_AHB_DE_FE1 65
+#define CLK_AHB_GMAC 66
+#define CLK_AHB_MP 67
+#define CLK_AHB_GPU 68
+
+/* APB0 Gates */
+#define CLK_APB0_CODEC 69
+#define CLK_APB0_SPDIF 70
+#define CLK_APB0_I2S0 71
+#define CLK_APB0_AC97 72
+#define CLK_APB0_I2S1 73
+#define CLK_APB0_PIO 74
+#define CLK_APB0_IR0 75
+#define CLK_APB0_IR1 76
+#define CLK_APB0_I2S2 77
+#define CLK_APB0_KEYPAD 78
+
+/* APB1 Gates */
+#define CLK_APB1_I2C0 79
+#define CLK_APB1_I2C1 80
+#define CLK_APB1_I2C2 81
+#define CLK_APB1_I2C3 82
+#define CLK_APB1_CAN 83
+#define CLK_APB1_SCR 84
+#define CLK_APB1_PS20 85
+#define CLK_APB1_PS21 86
+#define CLK_APB1_I2C4 87
+#define CLK_APB1_UART0 88
+#define CLK_APB1_UART1 89
+#define CLK_APB1_UART2 90
+#define CLK_APB1_UART3 91
+#define CLK_APB1_UART4 92
+#define CLK_APB1_UART5 93
+#define CLK_APB1_UART6 94
+#define CLK_APB1_UART7 95
+
+/* IP clocks */
+#define CLK_NAND 96
+#define CLK_MS 97
+#define CLK_MMC0 98
+#define CLK_MMC0_OUTPUT 99
+#define CLK_MMC0_SAMPLE 100
+#define CLK_MMC1 101
+#define CLK_MMC1_OUTPUT 102
+#define CLK_MMC1_SAMPLE 103
+#define CLK_MMC2 104
+#define CLK_MMC2_OUTPUT 105
+#define CLK_MMC2_SAMPLE 106
+#define CLK_MMC3 107
+#define CLK_MMC3_OUTPUT 108
+#define CLK_MMC3_SAMPLE 109
+#define CLK_TS 110
+#define CLK_SS 111
+#define CLK_SPI0 112
+#define CLK_SPI1 113
+#define CLK_SPI2 114
+#define CLK_PATA 115
+#define CLK_IR0 116
+#define CLK_IR1 117
+#define CLK_I2S0 118
+#define CLK_AC97 119
+#define CLK_SPDIF 120
+#define CLK_KEYPAD 121
+#define CLK_SATA 122
+#define CLK_USB_OHCI0 123
+#define CLK_USB_OHCI1 124
+#define CLK_USB_PHY 125
+#define CLK_GPS 126
+#define CLK_SPI3 127
+#define CLK_I2S1 128
+#define CLK_I2S2 129
+
+/* DRAM Gates */
+#define CLK_DRAM_VE 130
+#define CLK_DRAM_CSI0 131
+#define CLK_DRAM_CSI1 132
+#define CLK_DRAM_TS 133
+#define CLK_DRAM_TVD 134
+#define CLK_DRAM_TVE0 135
+#define CLK_DRAM_TVE1 136
+#define CLK_DRAM_OUT 137
+#define CLK_DRAM_DE_FE1 138
+#define CLK_DRAM_DE_FE0 139
+#define CLK_DRAM_DE_BE0 140
+#define CLK_DRAM_DE_BE1 141
+#define CLK_DRAM_MP 142
+#define CLK_DRAM_ACE 143
+
+/* Display Engine Clocks */
+#define CLK_DE_BE0 144
+#define CLK_DE_BE1 145
+#define CLK_DE_FE0 146
+#define CLK_DE_FE1 147
+#define CLK_DE_MP 148
+#define CLK_TCON0_CH0 149
+#define CLK_TCON1_CH0 150
+#define CLK_CSI_SCLK 151
+#define CLK_TVD_SCLK2 152
+#define CLK_TVD 153
+#define CLK_TCON0_CH1_SCLK2 154
+#define CLK_TCON0_CH1 155
+#define CLK_TCON1_CH1_SCLK2 156
+#define CLK_TCON1_CH1 157
+#define CLK_CSI0 158
+#define CLK_CSI1 159
+#define CLK_CODEC 160
+#define CLK_VE 161
+#define CLK_AVS 162
+#define CLK_ACE 163
+#define CLK_HDMI 164
+#define CLK_GPU 165
+
+#endif /* _DT_BINDINGS_CLK_SUN4I_A10_H_ */
diff --git a/include/dt-bindings/clock/sun7i-a20-ccu.h b/include/dt-bindings/clock/sun7i-a20-ccu.h
new file mode 100644
index 0000000..045a517
--- /dev/null
+++ b/include/dt-bindings/clock/sun7i-a20-ccu.h
@@ -0,0 +1,53 @@
+/*
+ * Copyright (C) 2017 Priit Laes <***@plaes.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _DT_BINDINGS_CLK_SUN7I_A20_H_
+#define _DT_BINDINGS_CLK_SUN7I_A20_H_
+
+#include <dt-bindings/clock/sun4i-a10-ccu.h>
+
+#define CLK_MBUS 166
+#define CLK_HDMI1_SLOW 167
+#define CLK_HDMI1 168
+#define CLK_OUT_A 169
+#define CLK_OUT_B 170
+
+#endif /* _DT_BINDINGS_CLK_SUN7I_A20_H_ */
diff --git a/include/dt-bindings/reset/sun4i-a10-ccu.h b/include/dt-bindings/reset/sun4i-a10-ccu.h
new file mode 100644
index 0000000..e6f6b6e
--- /dev/null
+++ b/include/dt-bindings/reset/sun4i-a10-ccu.h
@@ -0,0 +1,67 @@
+/*
+ * Copyright (C) 2017 Priit Laes <***@plaes.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _DT_BINDINGS_RST_SUN4I_A10_H
+#define _DT_BINDINGS_RST_SUN4I_A10_H
+
+#define RST_USB_PHY0 1
+#define RST_USB_PHY1 2
+#define RST_USB_PHY2 3
+#define RST_GPS 4
+#define RST_DE_BE0 5
+#define RST_DE_BE1 6
+#define RST_DE_FE0 7
+#define RST_DE_FE1 8
+#define RST_DE_MP 9
+#define RST_TCON0 10
+#define RST_TCON1 11
+#define RST_CSI0 12
+#define RST_CSI1 13
+#define RST_VE 14
+#define RST_ACE 15
+#define RST_LVDS 16
+#define RST_GPU 17
+#define RST_HDMI_H 18
+#define RST_HDMI_SYS 19
+#define RST_HDMI_AUDIO_DMA 20
+
+#endif /* DT_BINDINGS_RST_SUN4I_A10_H */
--
git-series 0.9.1
--
You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+***@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
Jonathan Liu
2017-07-09 12:25:23 UTC
Reply
Permalink
Raw Message
Hi Priit,
Post by Priit Laes
Introduce a clock controller driver for sun4i A10 and sun7i A20
series SoCs.
---
drivers/clk/sunxi-ng/Kconfig | 14 +-
drivers/clk/sunxi-ng/Makefile | 1 +-
drivers/clk/sunxi-ng/ccu-sun4i-a10.c | 1448 ++++++++++++++++++++++-
drivers/clk/sunxi-ng/ccu-sun4i-a10.h | 61 +-
include/dt-bindings/clock/sun4i-a10-ccu.h | 200 +++-
include/dt-bindings/clock/sun7i-a20-ccu.h | 53 +-
include/dt-bindings/reset/sun4i-a10-ccu.h | 67 +-
7 files changed, 1844 insertions(+)
create mode 100644 drivers/clk/sunxi-ng/ccu-sun4i-a10.c
create mode 100644 drivers/clk/sunxi-ng/ccu-sun4i-a10.h
create mode 100644 include/dt-bindings/clock/sun4i-a10-ccu.h
create mode 100644 include/dt-bindings/clock/sun7i-a20-ccu.h
create mode 100644 include/dt-bindings/reset/sun4i-a10-ccu.h
[snip]
Post by Priit Laes
diff --git a/drivers/clk/sunxi-ng/ccu-sun4i-a10.c b/drivers/clk/sunxi-ng/ccu-sun4i-a10.c
new file mode 100644
index 0000000..49052b7
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu-sun4i-a10.c
[snip]
Post by Priit Laes
+static const char *const hdmi_parents[] = { "pll-video0", "pll-video0-2x",
+ "pll-video1", "pll-video1-2x" };
+static SUNXI_CCU_M_WITH_MUX_GATE(hdmi_clk, "hdmi", hdmi_parents,
+ 0x150, 0, 4, 24, 2, BIT(31), 0);
hdmi_parents is in the wrong order. The correct order is "pll-video0",
"pll-video1", "pll-video0-2x", "pll-video1-2x".

Regards,
Jonathan
--
You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+***@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
Priit Laes
2017-07-13 19:12:21 UTC
Reply
Permalink
Raw Message
Post by Jonathan Liu
Hi Priit,
Post by Priit Laes
Introduce a clock controller driver for sun4i A10 and sun7i A20
series SoCs.
---
drivers/clk/sunxi-ng/Kconfig | 14 +-
drivers/clk/sunxi-ng/Makefile | 1 +-
drivers/clk/sunxi-ng/ccu-sun4i-a10.c | 1448 ++++++++++++++++++++++-
drivers/clk/sunxi-ng/ccu-sun4i-a10.h | 61 +-
include/dt-bindings/clock/sun4i-a10-ccu.h | 200 +++-
include/dt-bindings/clock/sun7i-a20-ccu.h | 53 +-
include/dt-bindings/reset/sun4i-a10-ccu.h | 67 +-
7 files changed, 1844 insertions(+)
create mode 100644 drivers/clk/sunxi-ng/ccu-sun4i-a10.c
create mode 100644 drivers/clk/sunxi-ng/ccu-sun4i-a10.h
create mode 100644 include/dt-bindings/clock/sun4i-a10-ccu.h
create mode 100644 include/dt-bindings/clock/sun7i-a20-ccu.h
create mode 100644 include/dt-bindings/reset/sun4i-a10-ccu.h
[snip]
Post by Priit Laes
diff --git a/drivers/clk/sunxi-ng/ccu-sun4i-a10.c b/drivers/clk/sunxi-ng/ccu-sun4i-a10.c
new file mode 100644
index 0000000..49052b7
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu-sun4i-a10.c
[snip]
Post by Priit Laes
+static const char *const hdmi_parents[] = { "pll-video0", "pll-video0-2x",
+ "pll-video1", "pll-video1-2x" };
+static SUNXI_CCU_M_WITH_MUX_GATE(hdmi_clk, "hdmi", hdmi_parents,
+ 0x150, 0, 4, 24, 2, BIT(31), 0);
hdmi_parents is in the wrong order. The correct order is "pll-video0",
"pll-video1", "pll-video0-2x", "pll-video1-2x".
Ugh.. I'm really sorry.

Päikest,
Priit
--
You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+***@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
Olliver Schinagl
2017-07-10 09:45:32 UTC
Reply
Permalink
Raw Message
Hi Pleas,

again, but this time with content :)
Post by Priit Laes
Introduce a clock controller driver for sun4i A10 and sun7i A20
series SoCs.
---
drivers/clk/sunxi-ng/Kconfig | 14 +-
drivers/clk/sunxi-ng/Makefile | 1 +-
drivers/clk/sunxi-ng/ccu-sun4i-a10.c | 1448 ++++++++++++++++++++++-
drivers/clk/sunxi-ng/ccu-sun4i-a10.h | 61 +-
include/dt-bindings/clock/sun4i-a10-ccu.h | 200 +++-
include/dt-bindings/clock/sun7i-a20-ccu.h | 53 +-
include/dt-bindings/reset/sun4i-a10-ccu.h | 67 +-
7 files changed, 1844 insertions(+)
create mode 100644 drivers/clk/sunxi-ng/ccu-sun4i-a10.c
create mode 100644 drivers/clk/sunxi-ng/ccu-sun4i-a10.h
create mode 100644 include/dt-bindings/clock/sun4i-a10-ccu.h
create mode 100644 include/dt-bindings/clock/sun7i-a20-ccu.h
create mode 100644 include/dt-bindings/reset/sun4i-a10-ccu.h
diff --git a/drivers/clk/sunxi-ng/Kconfig b/drivers/clk/sunxi-ng/Kconfig
index 7342928..381cc32 100644
--- a/drivers/clk/sunxi-ng/Kconfig
+++ b/drivers/clk/sunxi-ng/Kconfig
@@ -11,6 +11,19 @@ config SUN50I_A64_CCU
default ARM64 && ARCH_SUNXI
depends on (ARM64 && ARCH_SUNXI) || COMPILE_TEST
+config SUNXI_A10_CCU
I understand why you say sunXi here (it's support for both sun4i and
sun7i) but then why A10, as it also supports the A20.

I guess the CCU is identical on the A20 and the A10, right? Thus would
it not be sensible to just call it sun4i_ccu (like we do for sun5i_ccu
below?
Post by Priit Laes
+ bool "Support for the Allwinner A10/A20 CCU"
+ select SUNXI_CCU_DIV
+ select SUNXI_CCU_MULT
+ select SUNXI_CCU_NK
+ select SUNXI_CCU_NKM
+ select SUNXI_CCU_NM
+ select SUNXI_CCU_MP
+ select SUNXI_CCU_PHASE
+ default MACH_SUN4I
+ default MACH_SUN7I
+ depends on MACH_SUN4I || MACH_SUN7I || COMPILE_TEST
+
config SUN5I_CCU
bool "Support for the Allwinner sun5i family CCM"
default MACH_SUN5I
@@ -57,4 +70,5 @@ config SUN8I_R_CCU
bool "Support for Allwinner SoCs' PRCM CCUs"
default MACH_SUN8I || (ARCH_SUNXI && ARM64)
+
oops?
Post by Priit Laes
endif
diff --git a/drivers/clk/sunxi-ng/Makefile b/drivers/clk/sunxi-ng/Makefile
index 0c45fa5..01e958c 100644
--- a/drivers/clk/sunxi-ng/Makefile
+++ b/drivers/clk/sunxi-ng/Makefile
@@ -21,6 +21,7 @@ lib-$(CONFIG_SUNXI_CCU) += ccu_mp.o
obj-$(CONFIG_SUN50I_A64_CCU) += ccu-sun50i-a64.o
obj-$(CONFIG_SUN5I_CCU) += ccu-sun5i.o
obj-$(CONFIG_SUN6I_A31_CCU) += ccu-sun6i-a31.o
+obj-$(CONFIG_SUNXI_A10_CCU) += ccu-sun4i-a10.o
obj-$(CONFIG_SUN8I_A23_CCU) += ccu-sun8i-a23.o
obj-$(CONFIG_SUN8I_A33_CCU) += ccu-sun8i-a33.o
obj-$(CONFIG_SUN8I_A83T_CCU) += ccu-sun8i-a83t.o
diff --git a/drivers/clk/sunxi-ng/ccu-sun4i-a10.c b/drivers/clk/sunxi-ng/ccu-sun4i-a10.c
new file mode 100644
index 0000000..49052b7
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu-sun4i-a10.c
<snip>
Post by Priit Laes
+static const char *const apb1_parents[] = { "hosc", "pll-periph", "osc32k" };
+static SUNXI_CCU_MP_WITH_MUX(apb1_clk, "apb1", apb1_parents, 0x058,
+ 0, 5, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ 0);
+
+/* Not present on A20 */
+static SUNXI_CCU_GATE(axi_dram_clk, "axi-dram", "ahb",
+ 0x05c, BIT(31), 0);
Same here I guess, two defines make this a bit more readable.
Post by Priit Laes
+
+static SUNXI_CCU_GATE(ahb_otg_clk, "ahb-otg", "ahb",
+ 0x060, BIT(0), 0);
+static SUNXI_CCU_GATE(ahb_ehci0_clk, "ahb-ehci0", "ahb",
+ 0x060, BIT(1), 0);
+static SUNXI_CCU_GATE(ahb_ohci0_clk, "ahb-ohci0", "ahb",
+ 0x060, BIT(2), 0);
+static SUNXI_CCU_GATE(ahb_ehci1_clk, "ahb-ehci1", "ahb",
+ 0x060, BIT(3), 0);
+static SUNXI_CCU_GATE(ahb_ohci1_clk, "ahb-ohci1", "ahb",
+ 0x060, BIT(4), 0);
+static SUNXI_CCU_GATE(ahb_ss_clk, "ahb-ss", "ahb",
+ 0x060, BIT(5), 0);
+static SUNXI_CCU_GATE(ahb_dma_clk, "ahb-dma", "ahb",
+ 0x060, BIT(6), 0);
+static SUNXI_CCU_GATE(ahb_bist_clk, "ahb-bist", "ahb",
+ 0x060, BIT(7), 0);
+static SUNXI_CCU_GATE(ahb_mmc0_clk, "ahb-mmc0", "ahb",
+ 0x060, BIT(8), 0);
+static SUNXI_CCU_GATE(ahb_mmc1_clk, "ahb-mmc1", "ahb",
+ 0x060, BIT(9), 0);
+static SUNXI_CCU_GATE(ahb_mmc2_clk, "ahb-mmc2", "ahb",
+ 0x060, BIT(10), 0);
+static SUNXI_CCU_GATE(ahb_mmc3_clk, "ahb-mmc3", "ahb",
+ 0x060, BIT(11), 0);
+static SUNXI_CCU_GATE(ahb_ms_clk, "ahb-ms", "ahb",
+ 0x060, BIT(12), 0);
+static SUNXI_CCU_GATE(ahb_nand_clk, "ahb-nand", "ahb",
+ 0x060, BIT(13), 0);
+static SUNXI_CCU_GATE(ahb_sdram_clk, "ahb-sdram", "ahb",
+ 0x060, BIT(14), CLK_IS_CRITICAL);
<snip>
Post by Priit Laes
+static struct ccu_reset_map sun7i_a20_ccu_resets[] = {
+ [RST_USB_PHY0] = { 0x0cc, BIT(0) },
+ [RST_USB_PHY1] = { 0x0cc, BIT(1) },
+ [RST_USB_PHY2] = { 0x0cc, BIT(2) },
+ [RST_GPS] = { 0x0d0, BIT(0) },
+ [RST_DE_BE0] = { 0x104, BIT(30) },
+ [RST_DE_BE1] = { 0x108, BIT(30) },
+ [RST_DE_FE0] = { 0x10c, BIT(30) },
+ [RST_DE_FE1] = { 0x110, BIT(30) },
+ [RST_DE_MP] = { 0x114, BIT(30) },
+ [RST_TCON0] = { 0x118, BIT(30) },
+ [RST_TCON1] = { 0x11c, BIT(30) },
You are missing the TV encoder reset:
+ [RST_TVE0] = { 0x118, BIT(29) },
+ [RST_TVE1] = { 0x11c, BIT(29) },

(to match your table i did not use defines :p)
Post by Priit Laes
+ [RST_CSI0] = { 0x134, BIT(30) },
+ [RST_CSI1] = { 0x138, BIT(30) },
+ [RST_VE] = { 0x13c, BIT(0) },
+ [RST_ACE] = { 0x148, BIT(16) },
+ [RST_LVDS] = { 0x14c, BIT(0) },
+ [RST_GPU] = { 0x154, BIT(30) },
+ [RST_HDMI_H] = { 0x170, BIT(0) },
+ [RST_HDMI_SYS] = { 0x170, BIT(1) },
+ [RST_HDMI_AUDIO_DMA] = { 0x170, BIT(2) },
+};
<snip>
Post by Priit Laes
+#ifndef _DT_BINDINGS_RST_SUN4I_A10_H
+#define _DT_BINDINGS_RST_SUN4I_A10_H
+
+#define RST_USB_PHY0 1
+#define RST_USB_PHY1 2
+#define RST_USB_PHY2 3
+#define RST_GPS 4
+#define RST_DE_BE0 5
+#define RST_DE_BE1 6
+#define RST_DE_FE0 7
+#define RST_DE_FE1 8
+#define RST_DE_MP 9
+#define RST_TCON0 10
+#define RST_TCON1 11
Also here the TV encoder.

+#define RST_TVE0 21
+#define RST_TVE1 22
Post by Priit Laes
+#define RST_CSI0 12
+#define RST_CSI1 13
+#define RST_VE 14
+#define RST_ACE 15
+#define RST_LVDS 16
+#define RST_GPU 17
+#define RST_HDMI_H 18
+#define RST_HDMI_SYS 19
+#define RST_HDMI_AUDIO_DMA 20
+
+#endif /* DT_BINDINGS_RST_SUN4I_A10_H */
--
You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+***@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
Priit Laes
2017-07-13 19:23:58 UTC
Reply
Permalink
Raw Message
Post by Olliver Schinagl
Hi Pleas,
again, but this time with content :)
Post by Priit Laes
Introduce a clock controller driver for sun4i A10 and sun7i A20
series SoCs.
[ ... ]
Post by Olliver Schinagl
Post by Priit Laes
+++ b/drivers/clk/sunxi-ng/Kconfig
@@ -11,6 +11,19 @@ config SUN50I_A64_CCU
default ARM64 && ARCH_SUNXI
depends on (ARM64 && ARCH_SUNXI) || COMPILE_TEST
+config SUNXI_A10_CCU
I understand why you say sunXi here (it's support for both sun4i and sun7i)
but then why A10, as it also supports the A20.
I guess the CCU is identical on the A20 and the A10, right? Thus would it
not be sensible to just call it sun4i_ccu (like we do for sun5i_ccu below?
No, it's not identical.
Post by Olliver Schinagl
Post by Priit Laes
+ bool "Support for the Allwinner A10/A20 CCU"
+ select SUNXI_CCU_DIV
+ select SUNXI_CCU_MULT
+ select SUNXI_CCU_NK
+ select SUNXI_CCU_NKM
+ select SUNXI_CCU_NM
+ select SUNXI_CCU_MP
+ select SUNXI_CCU_PHASE
+ default MACH_SUN4I
+ default MACH_SUN7I
+ depends on MACH_SUN4I || MACH_SUN7I || COMPILE_TEST
+
config SUN5I_CCU
bool "Support for the Allwinner sun5i family CCM"
default MACH_SUN5I
@@ -57,4 +70,5 @@ config SUN8I_R_CCU
bool "Support for Allwinner SoCs' PRCM CCUs"
default MACH_SUN8I || (ARCH_SUNXI && ARM64)
+
oops?
OK
Post by Olliver Schinagl
Post by Priit Laes
new file mode 100644
index 0000000..49052b7
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu-sun4i-a10.c
<snip>
Post by Priit Laes
+static const char *const apb1_parents[] = { "hosc", "pll-periph", "osc32k" };
+static SUNXI_CCU_MP_WITH_MUX(apb1_clk, "apb1", apb1_parents, 0x058,
+ 0, 5, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ 0);
+
+/* Not present on A20 */
+static SUNXI_CCU_GATE(axi_dram_clk, "axi-dram", "ahb",
+ 0x05c, BIT(31), 0);
Same here I guess, two defines make this a bit more readable.
You mean SUN4I_CCU_GATE? and SUN7I_CCU_GATE defines?
I don't think it makes things more readable...
Post by Olliver Schinagl
Post by Priit Laes
+
+static SUNXI_CCU_GATE(ahb_otg_clk, "ahb-otg", "ahb",
...
Post by Olliver Schinagl
Post by Priit Laes
+ 0x060, BIT(14), CLK_IS_CRITICAL);
<snip>
Post by Priit Laes
+static struct ccu_reset_map sun7i_a20_ccu_resets[] = {
+ [RST_USB_PHY0] = { 0x0cc, BIT(0) },
+ [RST_USB_PHY1] = { 0x0cc, BIT(1) },
+ [RST_USB_PHY2] = { 0x0cc, BIT(2) },
+ [RST_GPS] = { 0x0d0, BIT(0) },
+ [RST_DE_BE0] = { 0x104, BIT(30) },
+ [RST_DE_BE1] = { 0x108, BIT(30) },
+ [RST_DE_FE0] = { 0x10c, BIT(30) },
+ [RST_DE_FE1] = { 0x110, BIT(30) },
+ [RST_DE_MP] = { 0x114, BIT(30) },
+ [RST_TCON0] = { 0x118, BIT(30) },
+ [RST_TCON1] = { 0x11c, BIT(30) },
+ [RST_TVE0] = { 0x118, BIT(29) },
+ [RST_TVE1] = { 0x11c, BIT(29) },
(to match your table i did not use defines :p)
Where did you get this information?
This is not present in any datasheets I have:
* A10 - 1.50
* A20 - 1.4

[...]

Päikest,
Priit Laes
--
You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+***@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
Olliver Schinagl
2017-07-13 19:46:57 UTC
Reply
Permalink
Raw Message
Hey Priit,
Post by Priit Laes
Post by Olliver Schinagl
Hi Pleas,
again, but this time with content :)
Post by Priit Laes
Introduce a clock controller driver for sun4i A10 and sun7i A20
series SoCs.
[ ... ]
Post by Olliver Schinagl
Post by Priit Laes
+++ b/drivers/clk/sunxi-ng/Kconfig
@@ -11,6 +11,19 @@ config SUN50I_A64_CCU
default ARM64 && ARCH_SUNXI
depends on (ARM64 && ARCH_SUNXI) || COMPILE_TEST
+config SUNXI_A10_CCU
I understand why you say sunXi here (it's support for both sun4i and sun7i)
but then why A10, as it also supports the A20.
I guess the CCU is identical on the A20 and the A10, right? Thus would it
not be sensible to just call it sun4i_ccu (like we do for sun5i_ccu below?
No, it's not identical.
But then saying SUNXI_A10_CCU is not correct? Since it is not identical
on the A20? So what does the A10 stand for?
Post by Priit Laes
Post by Olliver Schinagl
Post by Priit Laes
+ bool "Support for the Allwinner A10/A20 CCU"
+ select SUNXI_CCU_DIV
+ select SUNXI_CCU_MULT
+ select SUNXI_CCU_NK
+ select SUNXI_CCU_NKM
+ select SUNXI_CCU_NM
+ select SUNXI_CCU_MP
+ select SUNXI_CCU_PHASE
+ default MACH_SUN4I
+ default MACH_SUN7I
+ depends on MACH_SUN4I || MACH_SUN7I || COMPILE_TEST
+
config SUN5I_CCU
bool "Support for the Allwinner sun5i family CCM"
default MACH_SUN5I
@@ -57,4 +70,5 @@ config SUN8I_R_CCU
bool "Support for Allwinner SoCs' PRCM CCUs"
default MACH_SUN8I || (ARCH_SUNXI && ARM64)
+
oops?
OK
Post by Olliver Schinagl
Post by Priit Laes
new file mode 100644
index 0000000..49052b7
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu-sun4i-a10.c
<snip>
Post by Priit Laes
+static const char *const apb1_parents[] = { "hosc", "pll-periph", "osc32k" };
+static SUNXI_CCU_MP_WITH_MUX(apb1_clk, "apb1", apb1_parents, 0x058,
+ 0, 5, /* M */
+ 16, 2, /* P */
+ 24, 2, /* mux */
+ 0);
+
+/* Not present on A20 */
+static SUNXI_CCU_GATE(axi_dram_clk, "axi-dram", "ahb",
+ 0x05c, BIT(31), 0);
Same here I guess, two defines make this a bit more readable.
You mean SUN4I_CCU_GATE? and SUN7I_CCU_GATE defines?
I don't think it makes things more readable...
you think 0x05c and BIT(31) are easier to read? I'll do a pop quiz in 6
months from now and see if you remember :p
Post by Priit Laes
Post by Olliver Schinagl
Post by Priit Laes
+
+static SUNXI_CCU_GATE(ahb_otg_clk, "ahb-otg", "ahb",
...
Post by Olliver Schinagl
Post by Priit Laes
+ 0x060, BIT(14), CLK_IS_CRITICAL);
<snip>
Post by Priit Laes
+static struct ccu_reset_map sun7i_a20_ccu_resets[] = {
+ [RST_USB_PHY0] = { 0x0cc, BIT(0) },
+ [RST_USB_PHY1] = { 0x0cc, BIT(1) },
+ [RST_USB_PHY2] = { 0x0cc, BIT(2) },
+ [RST_GPS] = { 0x0d0, BIT(0) },
+ [RST_DE_BE0] = { 0x104, BIT(30) },
+ [RST_DE_BE1] = { 0x108, BIT(30) },
+ [RST_DE_FE0] = { 0x10c, BIT(30) },
+ [RST_DE_FE1] = { 0x110, BIT(30) },
+ [RST_DE_MP] = { 0x114, BIT(30) },
+ [RST_TCON0] = { 0x118, BIT(30) },
+ [RST_TCON1] = { 0x11c, BIT(30) },
+ [RST_TVE0] = { 0x118, BIT(29) },
+ [RST_TVE1] = { 0x11c, BIT(29) },
(to match your table i did not use defines :p)
Where did you get this information?
* A10 - 1.50
* A20 - 1.4
It is actually from the A13. In the A13 all the other bits match up. We
know from both that TCON0 is at 0x118 with its reset at BIT(30) and
TCON1 has its reset 0x11c. From the A13 datasheet we gather that TCON(0)
and TV(0) are at 0x118 with RST_TV on BIT(31) and thus it is only
logical that that for the TVE1 we have the rest at 0x11c.

But this is writing from the top of my head, I think we can also find it
in the 3.4 sources if I recall correctly.
Post by Priit Laes
[...]
Päikest,
Priit Laes
--
You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+***@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
Priit Laes
2017-07-14 13:48:54 UTC
Reply
Permalink
Raw Message
Post by Olliver Schinagl
Hey Priit,
Post by Priit Laes
Post by Olliver Schinagl
Hi Pleas,
again, but this time with content :)
Post by Priit Laes
Introduce a clock controller driver for sun4i A10 and sun7i A20
series SoCs.
[ ... ]
Post by Olliver Schinagl
Post by Priit Laes
+++ b/drivers/clk/sunxi-ng/Kconfig
@@ -11,6 +11,19 @@ config SUN50I_A64_CCU
default ARM64 && ARCH_SUNXI
depends on (ARM64 && ARCH_SUNXI) || COMPILE_TEST
+config SUNXI_A10_CCU
I understand why you say sunXi here (it's support for both sun4i and sun7i)
but then why A10, as it also supports the A20.
I guess the CCU is identical on the A20 and the A10, right? Thus would it
not be sensible to just call it sun4i_ccu (like we do for sun5i_ccu below?
No, it's not identical.
But then saying SUNXI_A10_CCU is not correct? Since it is not identical
on the A20? So what does the A10 stand for?
There's no easy way it supports both SUN4I_A10 and SUN7I_A20, therefore
I used SUNXI_A10 where SUNXI may indicate it's not only for SUN4I and
I'm currently keeping it as is...

[ ... ]
Post by Olliver Schinagl
Post by Priit Laes
Post by Olliver Schinagl
Post by Priit Laes
+/* Not present on A20 */
+static SUNXI_CCU_GATE(axi_dram_clk, "axi-dram", "ahb",
+ 0x05c, BIT(31), 0);
Same here I guess, two defines make this a bit more readable.
You mean SUN4I_CCU_GATE? and SUN7I_CCU_GATE defines?
I don't think it makes things more readable...
you think 0x05c and BIT(31) are easier to read? I'll do a pop quiz in 6
months from now and see if you remember :p
Can you give an example on how it should be written?
Post by Olliver Schinagl
Post by Priit Laes
Post by Olliver Schinagl
Post by Priit Laes
+
+static SUNXI_CCU_GATE(ahb_otg_clk, "ahb-otg", "ahb",
...
Post by Olliver Schinagl
Post by Priit Laes
+ 0x060, BIT(14), CLK_IS_CRITICAL);
<snip>
Post by Priit Laes
+static struct ccu_reset_map sun7i_a20_ccu_resets[] = {
+ [RST_USB_PHY0] = { 0x0cc, BIT(0) },
+ [RST_USB_PHY1] = { 0x0cc, BIT(1) },
+ [RST_USB_PHY2] = { 0x0cc, BIT(2) },
+ [RST_GPS] = { 0x0d0, BIT(0) },
+ [RST_DE_BE0] = { 0x104, BIT(30) },
+ [RST_DE_BE1] = { 0x108, BIT(30) },
+ [RST_DE_FE0] = { 0x10c, BIT(30) },
+ [RST_DE_FE1] = { 0x110, BIT(30) },
+ [RST_DE_MP] = { 0x114, BIT(30) },
+ [RST_TCON0] = { 0x118, BIT(30) },
+ [RST_TCON1] = { 0x11c, BIT(30) },
+ [RST_TVE0] = { 0x118, BIT(29) },
+ [RST_TVE1] = { 0x11c, BIT(29) },
(to match your table i did not use defines :p)
Where did you get this information?
* A10 - 1.50
* A20 - 1.4
It is actually from the A13. In the A13 all the other bits match up. We
know from both that TCON0 is at 0x118 with its reset at BIT(30) and
TCON1 has its reset 0x11c. From the A13 datasheet we gather that TCON(0)
and TV(0) are at 0x118 with RST_TV on BIT(31) and thus it is only
logical that that for the TVE1 we have the rest at 0x11c.
But this is writing from the top of my head, I think we can also find it
in the 3.4 sources if I recall correctly.
Thanks, added the reset bits for TVE0/1.

Päikest,
Priit :)
--
You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+***@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
Priit Laes
2017-07-04 20:04:59 UTC
Reply
Permalink
Raw Message
Allwinner A10 is now driven by sunxi-ng CCU driver.

Add devicetree binding for it.

Acked-by: Rob Herring <***@kernel.org>
Signed-off-by: Priit Laes <***@plaes.org>
---
Documentation/devicetree/bindings/clock/sunxi-ccu.txt | 1 +
1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
index 81d0fa4..429168d 100644
--- a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
+++ b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
@@ -3,6 +3,7 @@ Allwinner Clock Control Unit Binding

Required properties :
- compatible: must contain one of the following compatibles:
+ - "allwinner,sun4i-a10-ccu"
- "allwinner,sun6i-a31-ccu"
- "allwinner,sun7i-a20-ccu"
- "allwinner,sun8i-a23-ccu"
--
git-series 0.9.1
--
You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+***@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
Chen-Yu Tsai
2017-07-05 04:07:20 UTC
Reply
Permalink
Raw Message
Post by Priit Laes
Allwinner A10 is now driven by sunxi-ng CCU driver.
Add devicetree binding for it.
Reviewed-by: Chen-Yu Tsai <***@csie.org>
--
You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+***@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
Priit Laes
2017-07-04 20:05:01 UTC
Reply
Permalink
Raw Message
Convert sun4i-a10.dtsi to new CCU driver.

Tested on Gemei G9 tablet.

Signed-off-by: Priit Laes <***@plaes.org>
---
arch/arm/boot/dts/sun4i-a10.dtsi | 646 +++-----------------------------
1 file changed, 73 insertions(+), 573 deletions(-)

diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
index 41c2579..fc23c41 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -45,7 +45,6 @@

#include <dt-bindings/thermal/thermal.h>

-#include <dt-bindings/clock/sun4i-a10-pll2.h>
#include <dt-bindings/dma/sun4i-a10.h>

/ {
@@ -64,9 +63,9 @@
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_be0-lcd0-hdmi";
- clocks = <&ahb_gates 36>, <&ahb_gates 43>,
- <&ahb_gates 44>, <&de_be0_clk>,
- <&tcon0_ch1_clk>, <&dram_gates 26>;
+ clocks = <&ccu 56>, <&ccu 60>,
+ <&ccu 62>, <&ccu 144>,
+ <&ccu 155>, <&ccu 140>;
status = "disabled";
};

@@ -74,10 +73,11 @@
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_fe0-de_be0-lcd0-hdmi";
- clocks = <&ahb_gates 36>, <&ahb_gates 43>,
- <&ahb_gates 44>, <&ahb_gates 46>,
- <&de_be0_clk>, <&de_fe0_clk>, <&tcon0_ch1_clk>,
- <&dram_gates 25>, <&dram_gates 26>;
+ clocks = <&ccu 56>, <&ccu 60>,
+ <&ccu 62>, <&ccu 64>,
+ <&ccu 144>, <&ccu 146>,
+ <&ccu 155>, <&ccu 164>,
+ <&ccu 139>, <&ccu 140>;
status = "disabled";
};

@@ -85,9 +85,10 @@
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_fe0-de_be0-lcd0";
- clocks = <&ahb_gates 36>, <&ahb_gates 44>, <&ahb_gates 46>,
- <&de_be0_clk>, <&de_fe0_clk>, <&tcon0_ch0_clk>,
- <&dram_gates 25>, <&dram_gates 26>;
+ clocks = <&ccu 56>, <&ccu 62>,
+ <&ccu 64>, <&ccu 144>,
+ <&ccu 146>, <&ccu 149>,
+ <&ccu 139>, <&ccu 140>;
status = "disabled";
};

@@ -95,11 +96,11 @@
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_fe0-de_be0-lcd0-tve0";
- clocks = <&ahb_gates 34>, <&ahb_gates 36>,
- <&ahb_gates 44>, <&ahb_gates 46>,
- <&de_be0_clk>, <&de_fe0_clk>,
- <&tcon0_ch1_clk>, <&dram_gates 5>,
- <&dram_gates 25>, <&dram_gates 26>;
+ clocks = <&ccu 54>, <&ccu 56>,
+ <&ccu 62>, <&ccu 64>,
+ <&ccu 144>, <&ccu 146>,
+ <&ccu 155>, <&ccu 135>,
+ <&ccu 139>, <&ccu 140>;
status = "disabled";
};
};
@@ -111,7 +112,7 @@
device_type = "cpu";
compatible = "arm,cortex-a8";
reg = <0x0>;
- clocks = <&cpu>;
+ clocks = <&ccu 20>;
clock-latency = <244144>; /* 8 32k periods */
operating-points = <
/* kHz uV */
@@ -167,507 +168,19 @@
#size-cells = <1>;
ranges;

- /*
- * This is a dummy clock, to be used as placeholder on
- * other mux clocks when a specific parent clock is not
- * yet implemented. It should be dropped when the driver
- * is complete.
- */
- dummy: dummy {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <0>;
- };
-
osc24M: ***@01c20050 {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-osc-clk";
- reg = <0x01c20050 0x4>;
+ compatible = "fixed-clock";
clock-frequency = <24000000>;
clock-output-names = "osc24M";
};

- osc3M: osc3M_clk {
- compatible = "fixed-factor-clock";
- #clock-cells = <0>;
- clock-div = <8>;
- clock-mult = <1>;
- clocks = <&osc24M>;
- clock-output-names = "osc3M";
- };
-
osc32k: ***@0 {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <32768>;
clock-output-names = "osc32k";
};
-
- pll1: ***@01c20000 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-pll1-clk";
- reg = <0x01c20000 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll1";
- };
-
- pll2: ***@01c20008 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-pll2-clk";
- reg = <0x01c20008 0x8>;
- clocks = <&osc24M>;
- clock-output-names = "pll2-1x", "pll2-2x",
- "pll2-4x", "pll2-8x";
- };
-
- pll3: ***@01c20010 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-pll3-clk";
- reg = <0x01c20010 0x4>;
- clocks = <&osc3M>;
- clock-output-names = "pll3";
- };
-
- pll3x2: pll3x2_clk {
- compatible = "fixed-factor-clock";
- #clock-cells = <0>;
- clock-div = <1>;
- clock-mult = <2>;
- clocks = <&pll3>;
- clock-output-names = "pll3-2x";
- };
-
- pll4: ***@01c20018 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-pll1-clk";
- reg = <0x01c20018 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll4";
- };
-
- pll5: ***@01c20020 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-pll5-clk";
- reg = <0x01c20020 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll5_ddr", "pll5_other";
- };
-
- pll6: ***@01c20028 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-pll6-clk";
- reg = <0x01c20028 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll6_sata", "pll6_other", "pll6";
- };
-
- pll7: ***@01c20030 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-pll3-clk";
- reg = <0x01c20030 0x4>;
- clocks = <&osc3M>;
- clock-output-names = "pll7";
- };
-
- pll7x2: pll7x2_clk {
- compatible = "fixed-factor-clock";
- #clock-cells = <0>;
- clock-div = <1>;
- clock-mult = <2>;
- clocks = <&pll7>;
- clock-output-names = "pll7-2x";
- };
-
- /* dummy is 200M */
- cpu: ***@01c20054 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-cpu-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>;
- clock-output-names = "cpu";
- };
-
- axi: ***@01c20054 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-axi-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&cpu>;
- clock-output-names = "axi";
- };
-
- axi_gates: ***@01c2005c {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-axi-gates-clk";
- reg = <0x01c2005c 0x4>;
- clocks = <&axi>;
- clock-indices = <0>;
- clock-output-names = "axi_dram";
- };
-
- ahb: ***@01c20054 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-ahb-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&axi>;
- clock-output-names = "ahb";
- };
-
- ahb_gates: ***@01c20060 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-ahb-gates-clk";
- reg = <0x01c20060 0x8>;
- clocks = <&ahb>;
- clock-indices = <0>, <1>,
- <2>, <3>,
- <4>, <5>, <6>,
- <7>, <8>, <9>,
- <10>, <11>, <12>,
- <13>, <14>, <16>,
- <17>, <18>, <20>,
- <21>, <22>, <23>,
- <24>, <25>, <26>,
- <32>, <33>, <34>,
- <35>, <36>, <37>,
- <40>, <41>, <43>,
- <44>, <45>,
- <46>, <47>,
- <50>, <52>;
- clock-output-names = "ahb_usb0", "ahb_ehci0",
- "ahb_ohci0", "ahb_ehci1",
- "ahb_ohci1", "ahb_ss", "ahb_dma",
- "ahb_bist", "ahb_mmc0", "ahb_mmc1",
- "ahb_mmc2", "ahb_mmc3", "ahb_ms",
- "ahb_nand", "ahb_sdram", "ahb_ace",
- "ahb_emac", "ahb_ts", "ahb_spi0",
- "ahb_spi1", "ahb_spi2", "ahb_spi3",
- "ahb_pata", "ahb_sata", "ahb_gps",
- "ahb_ve", "ahb_tvd", "ahb_tve0",
- "ahb_tve1", "ahb_lcd0", "ahb_lcd1",
- "ahb_csi0", "ahb_csi1", "ahb_hdmi",
- "ahb_de_be0", "ahb_de_be1",
- "ahb_de_fe0", "ahb_de_fe1",
- "ahb_mp", "ahb_mali400";
- };
-
- apb0: ***@01c20054 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-apb0-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&ahb>;
- clock-output-names = "apb0";
- };
-
- apb0_gates: ***@01c20068 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-apb0-gates-clk";
- reg = <0x01c20068 0x4>;
- clocks = <&apb0>;
- clock-indices = <0>, <1>,
- <2>, <3>,
- <5>, <6>,
- <7>, <10>;
- clock-output-names = "apb0_codec", "apb0_spdif",
- "apb0_ac97", "apb0_iis",
- "apb0_pio", "apb0_ir0",
- "apb0_ir1", "apb0_keypad";
- };
-
- apb1: ***@01c20058 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-apb1-clk";
- reg = <0x01c20058 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&osc32k>;
- clock-output-names = "apb1";
- };
-
- apb1_gates: ***@01c2006c {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-apb1-gates-clk";
- reg = <0x01c2006c 0x4>;
- clocks = <&apb1>;
- clock-indices = <0>, <1>,
- <2>, <4>,
- <5>, <6>,
- <7>, <16>,
- <17>, <18>,
- <19>, <20>,
- <21>, <22>,
- <23>;
- clock-output-names = "apb1_i2c0", "apb1_i2c1",
- "apb1_i2c2", "apb1_can",
- "apb1_scr", "apb1_ps20",
- "apb1_ps21", "apb1_uart0",
- "apb1_uart1", "apb1_uart2",
- "apb1_uart3", "apb1_uart4",
- "apb1_uart5", "apb1_uart6",
- "apb1_uart7";
- };
-
- nand_clk: ***@01c20080 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c20080 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "nand";
- };
-
- ms_clk: ***@01c20084 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c20084 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "ms";
- };
-
- mmc0_clk: ***@01c20088 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-mmc-clk";
- reg = <0x01c20088 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "mmc0",
- "mmc0_output",
- "mmc0_sample";
- };
-
- mmc1_clk: ***@01c2008c {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-mmc-clk";
- reg = <0x01c2008c 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "mmc1",
- "mmc1_output",
- "mmc1_sample";
- };
-
- mmc2_clk: ***@01c20090 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-mmc-clk";
- reg = <0x01c20090 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "mmc2",
- "mmc2_output",
- "mmc2_sample";
- };
-
- mmc3_clk: ***@01c20094 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-mmc-clk";
- reg = <0x01c20094 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "mmc3",
- "mmc3_output",
- "mmc3_sample";
- };
-
- ts_clk: ***@01c20098 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c20098 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "ts";
- };
-
- ss_clk: ***@01c2009c {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c2009c 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "ss";
- };
-
- spi0_clk: ***@01c200a0 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200a0 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "spi0";
- };
-
- spi1_clk: ***@01c200a4 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200a4 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "spi1";
- };
-
- spi2_clk: ***@01c200a8 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200a8 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "spi2";
- };
-
- pata_clk: ***@01c200ac {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200ac 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "pata";
- };
-
- ir0_clk: ***@01c200b0 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200b0 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "ir0";
- };
-
- ir1_clk: ***@01c200b4 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200b4 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "ir1";
- };
-
- spdif_clk: ***@01c200c0 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod1-clk";
- reg = <0x01c200c0 0x4>;
- clocks = <&pll2 SUN4I_A10_PLL2_8X>,
- <&pll2 SUN4I_A10_PLL2_4X>,
- <&pll2 SUN4I_A10_PLL2_2X>,
- <&pll2 SUN4I_A10_PLL2_1X>;
- clock-output-names = "spdif";
- };
-
- usb_clk: ***@01c200cc {
- #clock-cells = <1>;
- #reset-cells = <1>;
- compatible = "allwinner,sun4i-a10-usb-clk";
- reg = <0x01c200cc 0x4>;
- clocks = <&pll6 1>;
- clock-output-names = "usb_ohci0", "usb_ohci1",
- "usb_phy";
- };
-
- spi3_clk: ***@01c200d4 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200d4 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "spi3";
- };
-
- dram_gates: ***@01c20100 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-dram-gates-clk";
- reg = <0x01c20100 0x4>;
- clocks = <&pll5 0>;
- clock-indices = <0>,
- <1>, <2>,
- <3>,
- <4>,
- <5>, <6>,
- <15>,
- <24>, <25>,
- <26>, <27>,
- <28>, <29>;
- clock-output-names = "dram_ve",
- "dram_csi0", "dram_csi1",
- "dram_ts",
- "dram_tvd",
- "dram_tve0", "dram_tve1",
- "dram_output",
- "dram_de_fe1", "dram_de_fe0",
- "dram_de_be0", "dram_de_be1",
- "dram_de_mp", "dram_ace";
- };
-
- de_be0_clk: ***@01c20104 {
- #clock-cells = <0>;
- #reset-cells = <0>;
- compatible = "allwinner,sun4i-a10-display-clk";
- reg = <0x01c20104 0x4>;
- clocks = <&pll3>, <&pll7>, <&pll5 1>;
- clock-output-names = "de-be0";
- };
-
- de_be1_clk: ***@01c20108 {
- #clock-cells = <0>;
- #reset-cells = <0>;
- compatible = "allwinner,sun4i-a10-display-clk";
- reg = <0x01c20108 0x4>;
- clocks = <&pll3>, <&pll7>, <&pll5 1>;
- clock-output-names = "de-be1";
- };
-
- de_fe0_clk: ***@01c2010c {
- #clock-cells = <0>;
- #reset-cells = <0>;
- compatible = "allwinner,sun4i-a10-display-clk";
- reg = <0x01c2010c 0x4>;
- clocks = <&pll3>, <&pll7>, <&pll5 1>;
- clock-output-names = "de-fe0";
- };
-
- de_fe1_clk: ***@01c20110 {
- #clock-cells = <0>;
- #reset-cells = <0>;
- compatible = "allwinner,sun4i-a10-display-clk";
- reg = <0x01c20110 0x4>;
- clocks = <&pll3>, <&pll7>, <&pll5 1>;
- clock-output-names = "de-fe1";
- };
-
-
- tcon0_ch0_clk: ***@01c20118 {
- #clock-cells = <0>;
- #reset-cells = <1>;
- compatible = "allwinner,sun4i-a10-tcon-ch0-clk";
- reg = <0x01c20118 0x4>;
- clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
- clock-output-names = "tcon0-ch0-sclk";
-
- };
-
- tcon1_ch0_clk: ***@01c2011c {
- #clock-cells = <0>;
- #reset-cells = <1>;
- compatible = "allwinner,sun4i-a10-tcon-ch1-clk";
- reg = <0x01c2011c 0x4>;
- clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
- clock-output-names = "tcon1-ch0-sclk";
-
- };
-
- tcon0_ch1_clk: ***@01c2012c {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-tcon-ch0-clk";
- reg = <0x01c2012c 0x4>;
- clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
- clock-output-names = "tcon0-ch1-sclk";
-
- };
-
- tcon1_ch1_clk: ***@01c20130 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-tcon-ch1-clk";
- reg = <0x01c20130 0x4>;
- clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
- clock-output-names = "tcon1-ch1-sclk";
-
- };
-
- ve_clk: ***@01c2013c {
- #clock-cells = <0>;
- #reset-cells = <0>;
- compatible = "allwinner,sun4i-a10-ve-clk";
- reg = <0x01c2013c 0x4>;
- clocks = <&pll4>;
- clock-output-names = "ve";
- };
-
- codec_clk: ***@01c20140 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-codec-clk";
- reg = <0x01c20140 0x4>;
- clocks = <&pll2 SUN4I_A10_PLL2_1X>;
- clock-output-names = "codec";
- };
};

***@01c00000 {
@@ -716,7 +229,7 @@
compatible = "allwinner,sun4i-a10-dma";
reg = <0x01c02000 0x1000>;
interrupts = <27>;
- clocks = <&ahb_gates 6>;
+ clocks = <&ccu 32>;
#dma-cells = <2>;
};

@@ -724,7 +237,7 @@
compatible = "allwinner,sun4i-a10-nand";
reg = <0x01c03000 0x1000>;
interrupts = <37>;
- clocks = <&ahb_gates 13>, <&nand_clk>;
+ clocks = <&ccu 39>, <&ccu 96>;
clock-names = "ahb", "mod";
dmas = <&dma SUN4I_DMA_DEDICATED 3>;
dma-names = "rxtx";
@@ -737,7 +250,7 @@
compatible = "allwinner,sun4i-a10-spi";
reg = <0x01c05000 0x1000>;
interrupts = <10>;
- clocks = <&ahb_gates 20>, <&spi0_clk>;
+ clocks = <&ccu 44>, <&ccu 112>;
clock-names = "ahb", "mod";
dmas = <&dma SUN4I_DMA_DEDICATED 27>,
<&dma SUN4I_DMA_DEDICATED 26>;
@@ -751,7 +264,7 @@
compatible = "allwinner,sun4i-a10-spi";
reg = <0x01c06000 0x1000>;
interrupts = <11>;
- clocks = <&ahb_gates 21>, <&spi1_clk>;
+ clocks = <&ccu 45>, <&ccu 113>;
clock-names = "ahb", "mod";
dmas = <&dma SUN4I_DMA_DEDICATED 9>,
<&dma SUN4I_DMA_DEDICATED 8>;
@@ -765,7 +278,7 @@
compatible = "allwinner,sun4i-a10-emac";
reg = <0x01c0b000 0x1000>;
interrupts = <55>;
- clocks = <&ahb_gates 17>;
+ clocks = <&ccu 42>;
allwinner,sram = <&emac_sram 1>;
status = "disabled";
};
@@ -781,14 +294,8 @@
mmc0: ***@01c0f000 {
compatible = "allwinner,sun4i-a10-mmc";
reg = <0x01c0f000 0x1000>;
- clocks = <&ahb_gates 8>,
- <&mmc0_clk 0>,
- <&mmc0_clk 1>,
- <&mmc0_clk 2>;
- clock-names = "ahb",
- "mmc",
- "output",
- "sample";
+ clocks = <&ccu 34>, <&ccu 98>;
+ clock-names = "ahb", "mmc";
interrupts = <32>;
status = "disabled";
#address-cells = <1>;
@@ -798,14 +305,8 @@
mmc1: ***@01c10000 {
compatible = "allwinner,sun4i-a10-mmc";
reg = <0x01c10000 0x1000>;
- clocks = <&ahb_gates 9>,
- <&mmc1_clk 0>,
- <&mmc1_clk 1>,
- <&mmc1_clk 2>;
- clock-names = "ahb",
- "mmc",
- "output",
- "sample";
+ clocks = <&ccu 35>, <&ccu 101>;
+ clock-names = "ahb", "mmc";
interrupts = <33>;
status = "disabled";
#address-cells = <1>;
@@ -815,14 +316,8 @@
mmc2: ***@01c11000 {
compatible = "allwinner,sun4i-a10-mmc";
reg = <0x01c11000 0x1000>;
- clocks = <&ahb_gates 10>,
- <&mmc2_clk 0>,
- <&mmc2_clk 1>,
- <&mmc2_clk 2>;
- clock-names = "ahb",
- "mmc",
- "output",
- "sample";
+ clocks = <&ccu 36>, <&ccu 104>;
+ clock-names = "ahb", "mmc";
interrupts = <34>;
status = "disabled";
#address-cells = <1>;
@@ -832,14 +327,8 @@
mmc3: ***@01c12000 {
compatible = "allwinner,sun4i-a10-mmc";
reg = <0x01c12000 0x1000>;
- clocks = <&ahb_gates 11>,
- <&mmc3_clk 0>,
- <&mmc3_clk 1>,
- <&mmc3_clk 2>;
- clock-names = "ahb",
- "mmc",
- "output",
- "sample";
+ clocks = <&ccu 37>, <&ccu 107>;
+ clock-names = "ahb", "mmc";
interrupts = <35>;
status = "disabled";
#address-cells = <1>;
@@ -849,7 +338,7 @@
usb_otg: ***@01c13000 {
compatible = "allwinner,sun4i-a10-musb";
reg = <0x01c13000 0x0400>;
- clocks = <&ahb_gates 0>;
+ clocks = <&ccu 26>;
interrupts = <38>;
interrupt-names = "mc";
phys = <&usbphy 0>;
@@ -864,9 +353,11 @@
compatible = "allwinner,sun4i-a10-usb-phy";
reg = <0x01c13400 0x10 0x01c14800 0x4 0x01c1c800 0x4>;
reg-names = "phy_ctrl", "pmu1", "pmu2";
- clocks = <&usb_clk 8>;
+ clocks = <&ccu 125>;
clock-names = "usb_phy";
- resets = <&usb_clk 0>, <&usb_clk 1>, <&usb_clk 2>;
+ resets = <&ccu 1>,
+ <&ccu 2>,
+ <&ccu 3>;
reset-names = "usb0_reset", "usb1_reset", "usb2_reset";
status = "disabled";
};
@@ -875,7 +366,7 @@
compatible = "allwinner,sun4i-a10-ehci", "generic-ehci";
reg = <0x01c14000 0x100>;
interrupts = <39>;
- clocks = <&ahb_gates 1>;
+ clocks = <&ccu 27>;
phys = <&usbphy 1>;
phy-names = "usb";
status = "disabled";
@@ -885,7 +376,7 @@
compatible = "allwinner,sun4i-a10-ohci", "generic-ohci";
reg = <0x01c14400 0x100>;
interrupts = <64>;
- clocks = <&usb_clk 6>, <&ahb_gates 2>;
+ clocks = <&ccu 123>, <&ccu 28>;
phys = <&usbphy 1>;
phy-names = "usb";
status = "disabled";
@@ -895,7 +386,7 @@
compatible = "allwinner,sun4i-a10-crypto";
reg = <0x01c15000 0x1000>;
interrupts = <86>;
- clocks = <&ahb_gates 5>, <&ss_clk>;
+ clocks = <&ccu 31>, <&ccu 111>;
clock-names = "ahb", "mod";
};

@@ -903,7 +394,7 @@
compatible = "allwinner,sun4i-a10-spi";
reg = <0x01c17000 0x1000>;
interrupts = <12>;
- clocks = <&ahb_gates 22>, <&spi2_clk>;
+ clocks = <&ccu 46>, <&ccu 114>;
clock-names = "ahb", "mod";
dmas = <&dma SUN4I_DMA_DEDICATED 29>,
<&dma SUN4I_DMA_DEDICATED 28>;
@@ -917,7 +408,7 @@
compatible = "allwinner,sun4i-a10-ahci";
reg = <0x01c18000 0x1000>;
interrupts = <56>;
- clocks = <&pll6 0>, <&ahb_gates 25>;
+ clocks = <&ccu 49>, <&ccu 122>;
status = "disabled";
};

@@ -925,7 +416,7 @@
compatible = "allwinner,sun4i-a10-ehci", "generic-ehci";
reg = <0x01c1c000 0x100>;
interrupts = <40>;
- clocks = <&ahb_gates 3>;
+ clocks = <&ccu 29>;
phys = <&usbphy 2>;
phy-names = "usb";
status = "disabled";
@@ -935,7 +426,7 @@
compatible = "allwinner,sun4i-a10-ohci", "generic-ohci";
reg = <0x01c1c400 0x100>;
interrupts = <65>;
- clocks = <&usb_clk 7>, <&ahb_gates 4>;
+ clocks = <&ccu 124>, <&ccu 30>;
phys = <&usbphy 2>;
phy-names = "usb";
status = "disabled";
@@ -945,7 +436,7 @@
compatible = "allwinner,sun4i-a10-spi";
reg = <0x01c1f000 0x1000>;
interrupts = <50>;
- clocks = <&ahb_gates 23>, <&spi3_clk>;
+ clocks = <&ccu 47>, <&ccu 127>;
clock-names = "ahb", "mod";
dmas = <&dma SUN4I_DMA_DEDICATED 31>,
<&dma SUN4I_DMA_DEDICATED 30>;
@@ -955,6 +446,15 @@
#size-cells = <0>;
};

+ ccu: ***@01c20000 {
+ compatible = "allwinner,sun4i-a10-ccu";
+ reg = <0x01c20000 0x400>;
+ clocks = <&osc24M>, <&osc32k>;
+ clock-names = "hosc", "losc";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
intc: interrupt-***@01c20400 {
compatible = "allwinner,sun4i-a10-ic";
reg = <0x01c20400 0x400>;
@@ -966,7 +466,7 @@
compatible = "allwinner,sun4i-a10-pinctrl";
reg = <0x01c20800 0x400>;
interrupts = <28>;
- clocks = <&apb0_gates 5>, <&osc24M>, <&osc32k>;
+ clocks = <&ccu 74>, <&osc24M>, <&osc32k>;
clock-names = "apb", "hosc", "losc";
gpio-controller;
interrupt-controller;
@@ -1143,7 +643,7 @@
compatible = "allwinner,sun4i-a10-spdif";
reg = <0x01c21000 0x400>;
interrupts = <13>;
- clocks = <&apb0_gates 1>, <&spdif_clk>;
+ clocks = <&ccu 70>, <&ccu 120>;
clock-names = "apb", "spdif";
dmas = <&dma SUN4I_DMA_NORMAL 2>,
<&dma SUN4I_DMA_NORMAL 2>;
@@ -1153,7 +653,7 @@

ir0: ***@01c21800 {
compatible = "allwinner,sun4i-a10-ir";
- clocks = <&apb0_gates 6>, <&ir0_clk>;
+ clocks = <&ccu 75>, <&ccu 116>;
clock-names = "apb", "ir";
interrupts = <5>;
reg = <0x01c21800 0x40>;
@@ -1162,7 +662,7 @@

ir1: ***@01c21c00 {
compatible = "allwinner,sun4i-a10-ir";
- clocks = <&apb0_gates 7>, <&ir1_clk>;
+ clocks = <&ccu 76>, <&ccu 117>;
clock-names = "apb", "ir";
interrupts = <6>;
reg = <0x01c21c00 0x40>;
@@ -1181,7 +681,7 @@
compatible = "allwinner,sun4i-a10-codec";
reg = <0x01c22c00 0x40>;
interrupts = <30>;
- clocks = <&apb0_gates 0>, <&codec_clk>;
+ clocks = <&ccu 69>, <&ccu 160>;
clock-names = "apb", "codec";
dmas = <&dma SUN4I_DMA_NORMAL 19>,
<&dma SUN4I_DMA_NORMAL 19>;
@@ -1207,7 +707,7 @@
interrupts = <1>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 16>;
+ clocks = <&ccu 88>;
status = "disabled";
};

@@ -1217,7 +717,7 @@
interrupts = <2>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 17>;
+ clocks = <&ccu 89>;
status = "disabled";
};

@@ -1227,7 +727,7 @@
interrupts = <3>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 18>;
+ clocks = <&ccu 90>;
status = "disabled";
};

@@ -1237,7 +737,7 @@
interrupts = <4>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 19>;
+ clocks = <&ccu 91>;
status = "disabled";
};

@@ -1247,7 +747,7 @@
interrupts = <17>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 20>;
+ clocks = <&ccu 92>;
status = "disabled";
};

@@ -1257,7 +757,7 @@
interrupts = <18>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 21>;
+ clocks = <&ccu 93>;
status = "disabled";
};

@@ -1267,7 +767,7 @@
interrupts = <19>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 22>;
+ clocks = <&ccu 94>;
status = "disabled";
};

@@ -1277,7 +777,7 @@
interrupts = <20>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 23>;
+ clocks = <&ccu 95>;
status = "disabled";
};

@@ -1285,7 +785,7 @@
compatible = "allwinner,sun4i-a10-ps2";
reg = <0x01c2a000 0x400>;
interrupts = <62>;
- clocks = <&apb1_gates 6>;
+ clocks = <&ccu 85>;
status = "disabled";
};

@@ -1293,7 +793,7 @@
compatible = "allwinner,sun4i-a10-ps2";
reg = <0x01c2a400 0x400>;
interrupts = <63>;
- clocks = <&apb1_gates 7>;
+ clocks = <&ccu 86>;
status = "disabled";
};

@@ -1301,7 +801,7 @@
compatible = "allwinner,sun4i-a10-i2c";
reg = <0x01c2ac00 0x400>;
interrupts = <7>;
- clocks = <&apb1_gates 0>;
+ clocks = <&ccu 79>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -1311,7 +811,7 @@
compatible = "allwinner,sun4i-a10-i2c";
reg = <0x01c2b000 0x400>;
interrupts = <8>;
- clocks = <&apb1_gates 1>;
+ clocks = <&ccu 80>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -1321,7 +821,7 @@
compatible = "allwinner,sun4i-a10-i2c";
reg = <0x01c2b400 0x400>;
interrupts = <9>;
- clocks = <&apb1_gates 2>;
+ clocks = <&ccu 81>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -1331,7 +831,7 @@
compatible = "allwinner,sun4i-a10-can";
reg = <0x01c2bc00 0x400>;
interrupts = <26>;
- clocks = <&apb1_gates 4>;
+ clocks = <&ccu 83>;
status = "disabled";
};
};
--
git-series 0.9.1
--
You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+***@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
Olliver Schinagl
2017-07-10 11:44:18 UTC
Reply
Permalink
Raw Message
Hi Pritt,
Post by Priit Laes
Convert sun4i-a10.dtsi to new CCU driver.
Tested on Gemei G9 tablet.
---
arch/arm/boot/dts/sun4i-a10.dtsi | 646 +++-----------------------------
1 file changed, 73 insertions(+), 573 deletions(-)
diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
index 41c2579..fc23c41 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -45,7 +45,6 @@
#include <dt-bindings/thermal/thermal.h>
-#include <dt-bindings/clock/sun4i-a10-pll2.h>
#include <dt-bindings/dma/sun4i-a10.h>
I think the same includes are missing here as well?

Olliver
--
You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+***@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
Priit Laes
2017-07-04 20:05:00 UTC
Reply
Permalink
Raw Message
Convert sun7i-a20.dtsi to new CCU driver.

Tested on Cubietruck.

Signed-off-by: Priit Laes <***@plaes.org>
---
arch/arm/boot/dts/sun7i-a20.dtsi | 719 +++-----------------------------
1 file changed, 84 insertions(+), 635 deletions(-)

diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index 96bee77..a5ca5a8 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -46,8 +46,6 @@

#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/thermal/thermal.h>
-
-#include <dt-bindings/clock/sun4i-a10-pll2.h>
#include <dt-bindings/dma/sun4i-a10.h>

/ {
@@ -66,9 +64,10 @@
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_be0-lcd0-hdmi";
- clocks = <&ahb_gates 36>, <&ahb_gates 43>,
- <&ahb_gates 44>, <&de_be0_clk>,
- <&tcon0_ch1_clk>, <&dram_gates 26>;
+ clocks = <&ccu 56>, <&ccu 60>,
+ <&ccu 62>, <&ccu 144>,
+ <&ccu 155>, <&ccu 140>,
+ <&ccu 164>;
status = "disabled";
};

@@ -76,9 +75,9 @@
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_be0-lcd0";
- clocks = <&ahb_gates 36>, <&ahb_gates 44>,
- <&de_be0_clk>, <&tcon0_ch0_clk>,
- <&dram_gates 26>;
+ clocks = <&ccu 56>, <&ccu 62>,
+ <&ccu 144>, <&ccu 149>,
+ <&ccu 140>;
status = "disabled";
};

@@ -86,10 +85,10 @@
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_be0-lcd0-tve0";
- clocks = <&ahb_gates 34>, <&ahb_gates 36>,
- <&ahb_gates 44>,
- <&de_be0_clk>, <&tcon0_ch1_clk>,
- <&dram_gates 5>, <&dram_gates 26>;
+ clocks = <&ccu 54>, <&ccu 56>,
+ <&ccu 62>,
+ <&ccu 144>, <&ccu 155>,
+ <&ccu 135>, <&ccu 140>;
status = "disabled";
};
};
@@ -102,7 +101,7 @@
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <0>;
- clocks = <&cpu>;
+ clocks = <&ccu 20>;
clock-latency = <244144>; /* 8 32k periods */
operating-points = <
/* kHz uV */
@@ -183,21 +182,11 @@

osc24M: ***@01c20050 {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-osc-clk";
- reg = <0x01c20050 0x4>;
+ compatible = "fixed-clock";
clock-frequency = <24000000>;
clock-output-names = "osc24M";
};

- osc3M: osc3M_clk {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
- clock-div = <8>;
- clock-mult = <1>;
- clocks = <&osc24M>;
- clock-output-names = "osc3M";
- };
-
osc32k: ***@0 {
#clock-cells = <0>;
compatible = "fixed-clock";
@@ -205,528 +194,6 @@
clock-output-names = "osc32k";
};

- pll1: ***@01c20000 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-pll1-clk";
- reg = <0x01c20000 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll1";
- };
-
- pll2: ***@01c20008 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-pll2-clk";
- reg = <0x01c20008 0x8>;
- clocks = <&osc24M>;
- clock-output-names = "pll2-1x", "pll2-2x",
- "pll2-4x", "pll2-8x";
- };
-
- pll3: ***@01c20010 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-pll3-clk";
- reg = <0x01c20010 0x4>;
- clocks = <&osc3M>;
- clock-output-names = "pll3";
- };
-
- pll3x2: pll3x2_clk {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
- clocks = <&pll3>;
- clock-div = <1>;
- clock-mult = <2>;
- clock-output-names = "pll3-2x";
- };
-
- pll4: ***@01c20018 {
- #clock-cells = <0>;
- compatible = "allwinner,sun7i-a20-pll4-clk";
- reg = <0x01c20018 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll4";
- };
-
- pll5: ***@01c20020 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-pll5-clk";
- reg = <0x01c20020 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll5_ddr", "pll5_other";
- };
-
- pll6: ***@01c20028 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-pll6-clk";
- reg = <0x01c20028 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll6_sata", "pll6_other", "pll6",
- "pll6_div_4";
- };
-
- pll7: ***@01c20030 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-pll3-clk";
- reg = <0x01c20030 0x4>;
- clocks = <&osc3M>;
- clock-output-names = "pll7";
- };
-
- pll7x2: pll7x2_clk {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
- clocks = <&pll7>;
- clock-div = <1>;
- clock-mult = <2>;
- clock-output-names = "pll7-2x";
- };
-
- pll8: ***@01c20040 {
- #clock-cells = <0>;
- compatible = "allwinner,sun7i-a20-pll4-clk";
- reg = <0x01c20040 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll8";
- };
-
- cpu: ***@01c20054 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-cpu-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll6 1>;
- clock-output-names = "cpu";
- };
-
- axi: ***@01c20054 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-axi-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&cpu>;
- clock-output-names = "axi";
- };
-
- ahb: ***@01c20054 {
- #clock-cells = <0>;
- compatible = "allwinner,sun5i-a13-ahb-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&axi>, <&pll6 3>, <&pll6 1>;
- clock-output-names = "ahb";
- /*
- * Use PLL6 as parent, instead of CPU/AXI
- * which has rate changes due to cpufreq
- */
- assigned-clocks = <&ahb>;
- assigned-clock-parents = <&pll6 3>;
- };
-
- ahb_gates: ***@01c20060 {
- #clock-cells = <1>;
- compatible = "allwinner,sun7i-a20-ahb-gates-clk";
- reg = <0x01c20060 0x8>;
- clocks = <&ahb>;
- clock-indices = <0>, <1>,
- <2>, <3>, <4>,
- <5>, <6>, <7>, <8>,
- <9>, <10>, <11>, <12>,
- <13>, <14>, <16>,
- <17>, <18>, <20>, <21>,
- <22>, <23>, <25>,
- <28>, <32>, <33>, <34>,
- <35>, <36>, <37>, <40>,
- <41>, <42>, <43>,
- <44>, <45>, <46>,
- <47>, <49>, <50>,
- <52>;
- clock-output-names = "ahb_usb0", "ahb_ehci0",
- "ahb_ohci0", "ahb_ehci1", "ahb_ohci1",
- "ahb_ss", "ahb_dma", "ahb_bist", "ahb_mmc0",
- "ahb_mmc1", "ahb_mmc2", "ahb_mmc3", "ahb_ms",
- "ahb_nand", "ahb_sdram", "ahb_ace",
- "ahb_emac", "ahb_ts", "ahb_spi0", "ahb_spi1",
- "ahb_spi2", "ahb_spi3", "ahb_sata",
- "ahb_hstimer", "ahb_ve", "ahb_tvd", "ahb_tve0",
- "ahb_tve1", "ahb_lcd0", "ahb_lcd1", "ahb_csi0",
- "ahb_csi1", "ahb_hdmi1", "ahb_hdmi0",
- "ahb_de_be0", "ahb_de_be1", "ahb_de_fe0",
- "ahb_de_fe1", "ahb_gmac", "ahb_mp",
- "ahb_mali";
- };
-
- apb0: ***@01c20054 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-apb0-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&ahb>;
- clock-output-names = "apb0";
- };
-
- apb0_gates: ***@01c20068 {
- #clock-cells = <1>;
- compatible = "allwinner,sun7i-a20-apb0-gates-clk";
- reg = <0x01c20068 0x4>;
- clocks = <&apb0>;
- clock-indices = <0>, <1>,
- <2>, <3>, <4>,
- <5>, <6>, <7>,
- <8>, <10>;
- clock-output-names = "apb0_codec", "apb0_spdif",
- "apb0_ac97", "apb0_i2s0", "apb0_i2s1",
- "apb0_pio", "apb0_ir0", "apb0_ir1",
- "apb0_i2s2", "apb0_keypad";
- };
-
- apb1: ***@01c20058 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-apb1-clk";
- reg = <0x01c20058 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&osc32k>;
- clock-output-names = "apb1";
- };
-
- apb1_gates: ***@01c2006c {
- #clock-cells = <1>;
- compatible = "allwinner,sun7i-a20-apb1-gates-clk";
- reg = <0x01c2006c 0x4>;
- clocks = <&apb1>;
- clock-indices = <0>, <1>,
- <2>, <3>, <4>,
- <5>, <6>, <7>,
- <15>, <16>, <17>,
- <18>, <19>, <20>,
- <21>, <22>, <23>;
- clock-output-names = "apb1_i2c0", "apb1_i2c1",
- "apb1_i2c2", "apb1_i2c3", "apb1_can",
- "apb1_scr", "apb1_ps20", "apb1_ps21",
- "apb1_i2c4", "apb1_uart0", "apb1_uart1",
- "apb1_uart2", "apb1_uart3", "apb1_uart4",
- "apb1_uart5", "apb1_uart6", "apb1_uart7";
- };
-
- nand_clk: ***@01c20080 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c20080 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "nand";
- };
-
- ms_clk: ***@01c20084 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c20084 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "ms";
- };
-
- mmc0_clk: ***@01c20088 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-mmc-clk";
- reg = <0x01c20088 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "mmc0",
- "mmc0_output",
- "mmc0_sample";
- };
-
- mmc1_clk: ***@01c2008c {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-mmc-clk";
- reg = <0x01c2008c 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "mmc1",
- "mmc1_output",
- "mmc1_sample";
- };
-
- mmc2_clk: ***@01c20090 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-mmc-clk";
- reg = <0x01c20090 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "mmc2",
- "mmc2_output",
- "mmc2_sample";
- };
-
- mmc3_clk: ***@01c20094 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-mmc-clk";
- reg = <0x01c20094 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "mmc3",
- "mmc3_output",
- "mmc3_sample";
- };
-
- ts_clk: ***@01c20098 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c20098 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "ts";
- };
-
- ss_clk: ***@01c2009c {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c2009c 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "ss";
- };
-
- spi0_clk: ***@01c200a0 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200a0 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "spi0";
- };
-
- spi1_clk: ***@01c200a4 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200a4 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "spi1";
- };
-
- spi2_clk: ***@01c200a8 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200a8 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "spi2";
- };
-
- pata_clk: ***@01c200ac {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200ac 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "pata";
- };
-
- ir0_clk: ***@01c200b0 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200b0 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "ir0";
- };
-
- ir1_clk: ***@01c200b4 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200b4 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "ir1";
- };
-
- i2s0_clk: ***@01c200b8 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod1-clk";
- reg = <0x01c200b8 0x4>;
- clocks = <&pll2 SUN4I_A10_PLL2_8X>,
- <&pll2 SUN4I_A10_PLL2_4X>,
- <&pll2 SUN4I_A10_PLL2_2X>,
- <&pll2 SUN4I_A10_PLL2_1X>;
- clock-output-names = "i2s0";
- };
-
- ac97_clk: ***@01c200bc {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod1-clk";
- reg = <0x01c200bc 0x4>;
- clocks = <&pll2 SUN4I_A10_PLL2_8X>,
- <&pll2 SUN4I_A10_PLL2_4X>,
- <&pll2 SUN4I_A10_PLL2_2X>,
- <&pll2 SUN4I_A10_PLL2_1X>;
- clock-output-names = "ac97";
- };
-
- spdif_clk: ***@01c200c0 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod1-clk";
- reg = <0x01c200c0 0x4>;
- clocks = <&pll2 SUN4I_A10_PLL2_8X>,
- <&pll2 SUN4I_A10_PLL2_4X>,
- <&pll2 SUN4I_A10_PLL2_2X>,
- <&pll2 SUN4I_A10_PLL2_1X>;
- clock-output-names = "spdif";
- };
-
- keypad_clk: ***@01c200c4 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200c4 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "keypad";
- };
-
- usb_clk: ***@01c200cc {
- #clock-cells = <1>;
- #reset-cells = <1>;
- compatible = "allwinner,sun4i-a10-usb-clk";
- reg = <0x01c200cc 0x4>;
- clocks = <&pll6 1>;
- clock-output-names = "usb_ohci0", "usb_ohci1",
- "usb_phy";
- };
-
- spi3_clk: ***@01c200d4 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200d4 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "spi3";
- };
-
- i2s1_clk: ***@01c200d8 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod1-clk";
- reg = <0x01c200d8 0x4>;
- clocks = <&pll2 SUN4I_A10_PLL2_8X>,
- <&pll2 SUN4I_A10_PLL2_4X>,
- <&pll2 SUN4I_A10_PLL2_2X>,
- <&pll2 SUN4I_A10_PLL2_1X>;
- clock-output-names = "i2s1";
- };
-
- i2s2_clk: ***@01c200dc {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod1-clk";
- reg = <0x01c200dc 0x4>;
- clocks = <&pll2 SUN4I_A10_PLL2_8X>,
- <&pll2 SUN4I_A10_PLL2_4X>,
- <&pll2 SUN4I_A10_PLL2_2X>,
- <&pll2 SUN4I_A10_PLL2_1X>;
- clock-output-names = "i2s2";
- };
-
- dram_gates: ***@01c20100 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-dram-gates-clk";
- reg = <0x01c20100 0x4>;
- clocks = <&pll5 0>;
- clock-indices = <0>,
- <1>, <2>,
- <3>,
- <4>,
- <5>, <6>,
- <15>,
- <24>, <25>,
- <26>, <27>,
- <28>, <29>;
- clock-output-names = "dram_ve",
- "dram_csi0", "dram_csi1",
- "dram_ts",
- "dram_tvd",
- "dram_tve0", "dram_tve1",
- "dram_output",
- "dram_de_fe1", "dram_de_fe0",
- "dram_de_be0", "dram_de_be1",
- "dram_de_mp", "dram_ace";
- };
-
- de_be0_clk: ***@01c20104 {
- #clock-cells = <0>;
- #reset-cells = <0>;
- compatible = "allwinner,sun4i-a10-display-clk";
- reg = <0x01c20104 0x4>;
- clocks = <&pll3>, <&pll7>, <&pll5 1>;
- clock-output-names = "de-be0";
- };
-
- de_be1_clk: ***@01c20108 {
- #clock-cells = <0>;
- #reset-cells = <0>;
- compatible = "allwinner,sun4i-a10-display-clk";
- reg = <0x01c20108 0x4>;
- clocks = <&pll3>, <&pll7>, <&pll5 1>;
- clock-output-names = "de-be1";
- };
-
- de_fe0_clk: ***@01c2010c {
- #clock-cells = <0>;
- #reset-cells = <0>;
- compatible = "allwinner,sun4i-a10-display-clk";
- reg = <0x01c2010c 0x4>;
- clocks = <&pll3>, <&pll7>, <&pll5 1>;
- clock-output-names = "de-fe0";
- };
-
- de_fe1_clk: ***@01c20110 {
- #clock-cells = <0>;
- #reset-cells = <0>;
- compatible = "allwinner,sun4i-a10-display-clk";
- reg = <0x01c20110 0x4>;
- clocks = <&pll3>, <&pll7>, <&pll5 1>;
- clock-output-names = "de-fe1";
- };
-
- tcon0_ch0_clk: ***@01c20118 {
- #clock-cells = <0>;
- #reset-cells = <1>;
- compatible = "allwinner,sun4i-a10-tcon-ch0-clk";
- reg = <0x01c20118 0x4>;
- clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
- clock-output-names = "tcon0-ch0-sclk";
-
- };
-
- tcon1_ch0_clk: ***@01c2011c {
- #clock-cells = <0>;
- #reset-cells = <1>;
- compatible = "allwinner,sun4i-a10-tcon-ch1-clk";
- reg = <0x01c2011c 0x4>;
- clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
- clock-output-names = "tcon1-ch0-sclk";
-
- };
-
- tcon0_ch1_clk: ***@01c2012c {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-tcon-ch0-clk";
- reg = <0x01c2012c 0x4>;
- clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
- clock-output-names = "tcon0-ch1-sclk";
-
- };
-
- tcon1_ch1_clk: ***@01c20130 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-tcon-ch1-clk";
- reg = <0x01c20130 0x4>;
- clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
- clock-output-names = "tcon1-ch1-sclk";
-
- };
-
- ve_clk: ***@01c2013c {
- #clock-cells = <0>;
- #reset-cells = <0>;
- compatible = "allwinner,sun4i-a10-ve-clk";
- reg = <0x01c2013c 0x4>;
- clocks = <&pll4>;
- clock-output-names = "ve";
- };
-
- codec_clk: ***@01c20140 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-codec-clk";
- reg = <0x01c20140 0x4>;
- clocks = <&pll2 SUN4I_A10_PLL2_1X>;
- clock-output-names = "codec";
- };
-
- mbus_clk: ***@01c2015c {
- #clock-cells = <0>;
- compatible = "allwinner,sun5i-a13-mbus-clk";
- reg = <0x01c2015c 0x4>;
- clocks = <&osc24M>, <&pll6 2>, <&pll5 1>;
- clock-output-names = "mbus";
- };
-
/*
* The following two are dummy clocks, placeholders
* used in the gmac_tx clock. The gmac driver will
@@ -736,14 +203,14 @@
* The actual TX clock rate is not controlled by the
* gmac_tx clock.
*/
- mii_phy_tx_clk: ***@2 {
+ mii_phy_tx_clk: ***@1 {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <25000000>;
clock-output-names = "mii_phy_tx";
};

- gmac_int_tx_clk: ***@3 {
+ gmac_int_tx_clk: ***@2 {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <125000000>;
@@ -757,34 +224,6 @@
clocks = <&mii_phy_tx_clk>, <&gmac_int_tx_clk>;
clock-output-names = "gmac_tx";
};
-
- /*
- * Dummy clock used by output clocks
- */
- osc24M_32k: ***@1 {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
- clock-div = <750>;
- clock-mult = <1>;
- clocks = <&osc24M>;
- clock-output-names = "osc24M_32k";
- };
-
- clk_out_a: ***@01c201f0 {
- #clock-cells = <0>;
- compatible = "allwinner,sun7i-a20-out-clk";
- reg = <0x01c201f0 0x4>;
- clocks = <&osc24M_32k>, <&osc32k>, <&osc24M>;
- clock-output-names = "clk_out_a";
- };
-
- clk_out_b: ***@01c201f4 {
- #clock-cells = <0>;
- compatible = "allwinner,sun7i-a20-out-clk";
- reg = <0x01c201f4 0x4>;
- clocks = <&osc24M_32k>, <&osc32k>, <&osc24M>;
- clock-output-names = "clk_out_b";
- };
};

***@01c00000 {
@@ -841,7 +280,7 @@
compatible = "allwinner,sun4i-a10-dma";
reg = <0x01c02000 0x1000>;
interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ahb_gates 6>;
+ clocks = <&ccu 32>;
#dma-cells = <2>;
};

@@ -849,7 +288,7 @@
compatible = "allwinner,sun4i-a10-nand";
reg = <0x01c03000 0x1000>;
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ahb_gates 13>, <&nand_clk>;
+ clocks = <&ccu 39>, <&ccu 96>;
clock-names = "ahb", "mod";
dmas = <&dma SUN4I_DMA_DEDICATED 3>;
dma-names = "rxtx";
@@ -862,7 +301,7 @@
compatible = "allwinner,sun4i-a10-spi";
reg = <0x01c05000 0x1000>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ahb_gates 20>, <&spi0_clk>;
+ clocks = <&ccu 44>, <&ccu 112>;
clock-names = "ahb", "mod";
dmas = <&dma SUN4I_DMA_DEDICATED 27>,
<&dma SUN4I_DMA_DEDICATED 26>;
@@ -877,7 +316,7 @@
compatible = "allwinner,sun4i-a10-spi";
reg = <0x01c06000 0x1000>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ahb_gates 21>, <&spi1_clk>;
+ clocks = <&ccu 45>, <&ccu 113>;
clock-names = "ahb", "mod";
dmas = <&dma SUN4I_DMA_DEDICATED 9>,
<&dma SUN4I_DMA_DEDICATED 8>;
@@ -892,7 +331,7 @@
compatible = "allwinner,sun4i-a10-emac";
reg = <0x01c0b000 0x1000>;
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ahb_gates 17>;
+ clocks = <&ccu 42>;
allwinner,sram = <&emac_sram 1>;
status = "disabled";
};
@@ -908,10 +347,10 @@
mmc0: ***@01c0f000 {
compatible = "allwinner,sun7i-a20-mmc";
reg = <0x01c0f000 0x1000>;
- clocks = <&ahb_gates 8>,
- <&mmc0_clk 0>,
- <&mmc0_clk 1>,
- <&mmc0_clk 2>;
+ clocks = <&ccu 34>,
+ <&ccu 98>,
+ <&ccu 99>,
+ <&ccu 100>;
clock-names = "ahb",
"mmc",
"output",
@@ -925,10 +364,10 @@
mmc1: ***@01c10000 {
compatible = "allwinner,sun7i-a20-mmc";
reg = <0x01c10000 0x1000>;
- clocks = <&ahb_gates 9>,
- <&mmc1_clk 0>,
- <&mmc1_clk 1>,
- <&mmc1_clk 2>;
+ clocks = <&ccu 35>,
+ <&ccu 101>,
+ <&ccu 102>,
+ <&ccu 103>;
clock-names = "ahb",
"mmc",
"output",
@@ -942,10 +381,10 @@
mmc2: ***@01c11000 {
compatible = "allwinner,sun7i-a20-mmc";
reg = <0x01c11000 0x1000>;
- clocks = <&ahb_gates 10>,
- <&mmc2_clk 0>,
- <&mmc2_clk 1>,
- <&mmc2_clk 2>;
+ clocks = <&ccu 36>,
+ <&ccu 104>,
+ <&ccu 105>,
+ <&ccu 106>;
clock-names = "ahb",
"mmc",
"output",
@@ -959,10 +398,10 @@
mmc3: ***@01c12000 {
compatible = "allwinner,sun7i-a20-mmc";
reg = <0x01c12000 0x1000>;
- clocks = <&ahb_gates 11>,
- <&mmc3_clk 0>,
- <&mmc3_clk 1>,
- <&mmc3_clk 2>;
+ clocks = <&ccu 37>,
+ <&ccu 107>,
+ <&ccu 108>,
+ <&ccu 109>;
clock-names = "ahb",
"mmc",
"output",
@@ -976,7 +415,7 @@
usb_otg: ***@01c13000 {
compatible = "allwinner,sun4i-a10-musb";
reg = <0x01c13000 0x0400>;
- clocks = <&ahb_gates 0>;
+ clocks = <&ccu 26>;
interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "mc";
phys = <&usbphy 0>;
@@ -991,9 +430,11 @@
compatible = "allwinner,sun7i-a20-usb-phy";
reg = <0x01c13400 0x10 0x01c14800 0x4 0x01c1c800 0x4>;
reg-names = "phy_ctrl", "pmu1", "pmu2";
- clocks = <&usb_clk 8>;
+ clocks = <&ccu 125>;
clock-names = "usb_phy";
- resets = <&usb_clk 0>, <&usb_clk 1>, <&usb_clk 2>;
+ resets = <&ccu 1>,
+ <&ccu 2>,
+ <&ccu 3>;
reset-names = "usb0_reset", "usb1_reset", "usb2_reset";
status = "disabled";
};
@@ -1002,7 +443,7 @@
compatible = "allwinner,sun7i-a20-ehci", "generic-ehci";
reg = <0x01c14000 0x100>;
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ahb_gates 1>;
+ clocks = <&ccu 27>;
phys = <&usbphy 1>;
phy-names = "usb";
status = "disabled";
@@ -1012,7 +453,7 @@
compatible = "allwinner,sun7i-a20-ohci", "generic-ohci";
reg = <0x01c14400 0x100>;
interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&usb_clk 6>, <&ahb_gates 2>;
+ clocks = <&ccu 123>, <&ccu 28>;
phys = <&usbphy 1>;
phy-names = "usb";
status = "disabled";
@@ -1023,7 +464,7 @@
"allwinner,sun4i-a10-crypto";
reg = <0x01c15000 0x1000>;
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ahb_gates 5>, <&ss_clk>;
+ clocks = <&ccu 31>, <&ccu 111>;
clock-names = "ahb", "mod";
};

@@ -1031,7 +472,7 @@
compatible = "allwinner,sun4i-a10-spi";
reg = <0x01c17000 0x1000>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ahb_gates 22>, <&spi2_clk>;
+ clocks = <&ccu 46>, <&ccu 114>;
clock-names = "ahb", "mod";
dmas = <&dma SUN4I_DMA_DEDICATED 29>,
<&dma SUN4I_DMA_DEDICATED 28>;
@@ -1046,7 +487,7 @@
compatible = "allwinner,sun4i-a10-ahci";
reg = <0x01c18000 0x1000>;
interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&pll6 0>, <&ahb_gates 25>;
+ clocks = <&ccu 49>, <&ccu 122>;
status = "disabled";
};

@@ -1054,7 +495,7 @@
compatible = "allwinner,sun7i-a20-ehci", "generic-ehci";
reg = <0x01c1c000 0x100>;
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ahb_gates 3>;
+ clocks = <&ccu 29>;
phys = <&usbphy 2>;
phy-names = "usb";
status = "disabled";
@@ -1064,7 +505,7 @@
compatible = "allwinner,sun7i-a20-ohci", "generic-ohci";
reg = <0x01c1c400 0x100>;
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&usb_clk 7>, <&ahb_gates 4>;
+ clocks = <&ccu 124>, <&ccu 30>;
phys = <&usbphy 2>;
phy-names = "usb";
status = "disabled";
@@ -1074,7 +515,7 @@
compatible = "allwinner,sun4i-a10-spi";
reg = <0x01c1f000 0x1000>;
interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ahb_gates 23>, <&spi3_clk>;
+ clocks = <&ccu 47>, <&ccu 127>;
clock-names = "ahb", "mod";
dmas = <&dma SUN4I_DMA_DEDICATED 31>,
<&dma SUN4I_DMA_DEDICATED 30>;
@@ -1085,11 +526,20 @@
num-cs = <1>;
};

+ ccu: ***@01c20000 {
+ compatible = "allwinner,sun7i-a20-ccu";
+ reg = <0x01c20000 0x400>;
+ clocks = <&osc24M>, <&osc32k>;
+ clock-names = "hosc", "losc";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
pio: ***@01c20800 {
compatible = "allwinner,sun7i-a20-pinctrl";
reg = <0x01c20800 0x400>;
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb0_gates 5>, <&osc24M>, <&osc32k>;
+ clocks = <&ccu 74>, <&osc24M>, <&osc32k>;
clock-names = "apb", "hosc", "losc";
gpio-controller;
interrupt-controller;
@@ -1360,7 +810,7 @@
compatible = "allwinner,sun4i-a10-spdif";
reg = <0x01c21000 0x400>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb0_gates 1>, <&spdif_clk>;
+ clocks = <&ccu 70>, <&ccu 120>;
clock-names = "apb", "spdif";
dmas = <&dma SUN4I_DMA_NORMAL 2>,
<&dma SUN4I_DMA_NORMAL 2>;
@@ -1370,7 +820,7 @@

ir0: ***@01c21800 {
compatible = "allwinner,sun4i-a10-ir";
- clocks = <&apb0_gates 6>, <&ir0_clk>;
+ clocks = <&ccu 75>, <&ccu 116>;
clock-names = "apb", "ir";
interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x01c21800 0x40>;
@@ -1379,7 +829,7 @@

ir1: ***@01c21c00 {
compatible = "allwinner,sun4i-a10-ir";
- clocks = <&apb0_gates 7>, <&ir1_clk>;
+ clocks = <&ccu 76>, <&ccu 117>;
clock-names = "apb", "ir";
interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x01c21c00 0x40>;
@@ -1391,7 +841,7 @@
compatible = "allwinner,sun4i-a10-i2s";
reg = <0x01c22000 0x400>;
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb0_gates 4>, <&i2s1_clk>;
+ clocks = <&ccu 73>, <&ccu 128>;
clock-names = "apb", "mod";
dmas = <&dma SUN4I_DMA_NORMAL 4>,
<&dma SUN4I_DMA_NORMAL 4>;
@@ -1404,7 +854,7 @@
compatible = "allwinner,sun4i-a10-i2s";
reg = <0x01c22400 0x400>;
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb0_gates 3>, <&i2s0_clk>;
+ clocks = <&ccu 71>, <&ccu 118>;
clock-names = "apb", "mod";
dmas = <&dma SUN4I_DMA_NORMAL 3>,
<&dma SUN4I_DMA_NORMAL 3>;
@@ -1424,7 +874,7 @@
compatible = "allwinner,sun7i-a20-codec";
reg = <0x01c22c00 0x40>;
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb0_gates 0>, <&codec_clk>;
+ clocks = <&ccu 69>, <&ccu 160>;
clock-names = "apb", "codec";
dmas = <&dma SUN4I_DMA_NORMAL 19>,
<&dma SUN4I_DMA_NORMAL 19>;
@@ -1442,7 +892,7 @@
compatible = "allwinner,sun4i-a10-i2s";
reg = <0x01c24400 0x400>;
interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb0_gates 8>, <&i2s2_clk>;
+ clocks = <&ccu 77>, <&ccu 129>;
clock-names = "apb", "mod";
dmas = <&dma SUN4I_DMA_NORMAL 6>,
<&dma SUN4I_DMA_NORMAL 6>;
@@ -1463,7 +913,7 @@
interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 16>;
+ clocks = <&ccu 88>;
status = "disabled";
};

@@ -1473,7 +923,7 @@
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 17>;
+ clocks = <&ccu 89>;
status = "disabled";
};

@@ -1483,7 +933,7 @@
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 18>;
+ clocks = <&ccu 90>;
status = "disabled";
};

@@ -1493,7 +943,7 @@
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 19>;
+ clocks = <&ccu 91>;
status = "disabled";
};

@@ -1503,7 +953,7 @@
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 20>;
+ clocks = <&ccu 92>;
status = "disabled";
};

@@ -1513,7 +963,7 @@
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 21>;
+ clocks = <&ccu 93>;
status = "disabled";
};

@@ -1523,7 +973,7 @@
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 22>;
+ clocks = <&ccu 94>;
status = "disabled";
};

@@ -1533,7 +983,7 @@
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 23>;
+ clocks = <&ccu 95>;
status = "disabled";
};

@@ -1541,7 +991,7 @@
compatible = "allwinner,sun4i-a10-ps2";
reg = <0x01c2a000 0x400>;
interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb1_gates 6>;
+ clocks = <&ccu 85>;
status = "disabled";
};

@@ -1549,7 +999,7 @@
compatible = "allwinner,sun4i-a10-ps2";
reg = <0x01c2a400 0x400>;
interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb1_gates 7>;
+ clocks = <&ccu 86>;
status = "disabled";
};

@@ -1558,7 +1008,7 @@
"allwinner,sun4i-a10-i2c";
reg = <0x01c2ac00 0x400>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb1_gates 0>;
+ clocks = <&ccu 79>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -1569,7 +1019,7 @@
"allwinner,sun4i-a10-i2c";
reg = <0x01c2b000 0x400>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb1_gates 1>;
+ clocks = <&ccu 80>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -1580,7 +1030,7 @@
"allwinner,sun4i-a10-i2c";
reg = <0x01c2b400 0x400>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb1_gates 2>;
+ clocks = <&ccu 81>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -1591,7 +1041,7 @@
"allwinner,sun4i-a10-i2c";
reg = <0x01c2b800 0x400>;
interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb1_gates 3>;
+ clocks = <&ccu 82>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -1602,7 +1052,7 @@
"allwinner,sun4i-a10-can";
reg = <0x01c2bc00 0x400>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb1_gates 4>;
+ clocks = <&ccu 83>;
status = "disabled";
};

@@ -1611,7 +1061,7 @@
"allwinner,sun4i-a10-i2c";
reg = <0x01c2c000 0x400>;
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb1_gates 15>;
+ clocks = <&ccu 87>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -1622,7 +1072,7 @@
reg = <0x01c50000 0x10000>;
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq";
- clocks = <&ahb_gates 49>, <&gmac_tx_clk>;
+ clocks = <&ccu 66>, <&gmac_tx_clk>;
clock-names = "stmmaceth", "allwinner_gmac_tx";
snps,pbl = <2>;
snps,fixed-burst;
@@ -1639,7 +1089,7 @@
<GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ahb_gates 28>;
+ clocks = <&ccu 51>;
};

gic: interrupt-***@01c81000 {
@@ -1652,6 +1102,5 @@
#interrupt-cells = <3>;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
-
};
};
--
git-series 0.9.1
--
You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+***@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
Olliver Schinagl
2017-07-10 11:23:51 UTC
Reply
Permalink
Raw Message
Hi Pleas,
Post by Priit Laes
Convert sun7i-a20.dtsi to new CCU driver.
Tested on Cubietruck.
---
arch/arm/boot/dts/sun7i-a20.dtsi | 719 +++-----------------------------
1 file changed, 84 insertions(+), 635 deletions(-)
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index 96bee77..a5ca5a8 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -46,8 +46,6 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/thermal/thermal.h>
-
-#include <dt-bindings/clock/sun4i-a10-pll2.h>
#include <dt-bindings/dma/sun4i-a10.h>
I had to add these includes here to make this all work:

+ #include <dt-bindings/clock/sun4i-a10-ccu.h>
+ #include <dt-bindings/clock/sun7i-a20-ccu.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/reset/sun4i-a10-ccu.h>
#include <dt-bindings/thermal/thermal.h>
#include <dt-bindings/dma/sun4i-a10.h>

Olliver
Post by Priit Laes
/ {
@@ -66,9 +64,10 @@
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_be0-lcd0-hdmi";
- clocks = <&ahb_gates 36>, <&ahb_gates 43>,
- <&ahb_gates 44>, <&de_be0_clk>,
- <&tcon0_ch1_clk>, <&dram_gates 26>;
+ clocks = <&ccu 56>, <&ccu 60>,
+ <&ccu 62>, <&ccu 144>,
+ <&ccu 155>, <&ccu 140>,
+ <&ccu 164>;
status = "disabled";
<snip>
--
You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+***@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
Maxime Ripard
2017-07-10 11:55:19 UTC
Reply
Permalink
Raw Message
Post by Olliver Schinagl
Hi Pleas,
Post by Priit Laes
Convert sun7i-a20.dtsi to new CCU driver.
Tested on Cubietruck.
---
arch/arm/boot/dts/sun7i-a20.dtsi | 719 +++-----------------------------
1 file changed, 84 insertions(+), 635 deletions(-)
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index 96bee77..a5ca5a8 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -46,8 +46,6 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/thermal/thermal.h>
-
-#include <dt-bindings/clock/sun4i-a10-pll2.h>
#include <dt-bindings/dma/sun4i-a10.h>
That's unlikely, none of the defines are used in this patch.

Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
--
You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+***@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
Olliver Schinagl
2017-07-10 12:24:17 UTC
Reply
Permalink
Raw Message
Hi Maxime,
Post by Maxime Ripard
Post by Olliver Schinagl
Hi Pleas,
Post by Priit Laes
Convert sun7i-a20.dtsi to new CCU driver.
Tested on Cubietruck.
---
arch/arm/boot/dts/sun7i-a20.dtsi | 719 +++-----------------------------
1 file changed, 84 insertions(+), 635 deletions(-)
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index 96bee77..a5ca5a8 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -46,8 +46,6 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/thermal/thermal.h>
-
-#include <dt-bindings/clock/sun4i-a10-pll2.h>
#include <dt-bindings/dma/sun4i-a10.h>
That's unlikely, none of the defines are used in this patch.
My appologies you are right. I needed to add them to get this ontop of
your DRM stack working for the A20. I looked at my local diff and
responded a bit overeagerly probably. Nice catch!

Olliver
Post by Maxime Ripard
Maxime
--
You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+***@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
Priit Laes
2017-07-04 20:04:56 UTC
Reply
Permalink
Raw Message
SATA clock on sun4i/sun7i is of type (parent) / M / 6 where
6 is fixed post-divider.

Signed-off-by: Priit Laes <***@plaes.org>
---
drivers/clk/sunxi-ng/ccu_div.c | 18 ++++++++++++++++--
drivers/clk/sunxi-ng/ccu_div.h | 3 ++-
2 files changed, 18 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/sunxi-ng/ccu_div.c b/drivers/clk/sunxi-ng/ccu_div.c
index c0e5c10..054b12a 100644
--- a/drivers/clk/sunxi-ng/ccu_div.c
+++ b/drivers/clk/sunxi-ng/ccu_div.c
@@ -21,6 +21,9 @@ static unsigned long ccu_div_round_rate(struct ccu_mux_internal *mux,
{
struct ccu_div *cd = data;

+ if (cd->common.features & CCU_FEATURE_FIXED_POSTDIV)
+ rate /= cd->fixed_post_div;
+
return divider_round_rate_parent(&cd->common.hw, parent,
rate, parent_rate,
cd->div.table, cd->div.width,
@@ -62,8 +65,13 @@ static unsigned long ccu_div_recalc_rate(struct clk_hw *hw,
parent_rate = ccu_mux_helper_apply_prediv(&cd->common, &cd->mux, -1,
parent_rate);

- return divider_recalc_rate(hw, parent_rate, val, cd->div.table,
- cd->div.flags);
+ val = divider_recalc_rate(hw, parent_rate, val, cd->div.table,
+ cd->div.flags);
+
+ if (cd->common.features & CCU_FEATURE_FIXED_POSTDIV)
+ val /= cd->fixed_post_div;
+
+ return val;
}

static int ccu_div_determine_rate(struct clk_hw *hw,
@@ -71,6 +79,9 @@ static int ccu_div_determine_rate(struct clk_hw *hw,
{
struct ccu_div *cd = hw_to_ccu_div(hw);

+ if (cd->common.features & CCU_FEATURE_FIXED_POSTDIV)
+ req->rate *= cd->fixed_post_div;
+
return ccu_mux_helper_determine_rate(&cd->common, &cd->mux,
req, ccu_div_round_rate, cd);
}
@@ -89,6 +100,9 @@ static int ccu_div_set_rate(struct clk_hw *hw, unsigned long rate,
val = divider_get_val(rate, parent_rate, cd->div.table, cd->div.width,
cd->div.flags);

+ if (cd->common.features & CCU_FEATURE_FIXED_POSTDIV)
+ val /= cd->fixed_post_div;
+
spin_lock_irqsave(cd->common.lock, flags);

reg = readl(cd->common.base + cd->common.reg);
diff --git a/drivers/clk/sunxi-ng/ccu_div.h b/drivers/clk/sunxi-ng/ccu_div.h
index 08d0744..f3a5028 100644
--- a/drivers/clk/sunxi-ng/ccu_div.h
+++ b/drivers/clk/sunxi-ng/ccu_div.h
@@ -86,9 +86,10 @@ struct ccu_div_internal {
struct ccu_div {
u32 enable;

- struct ccu_div_internal div;
+ struct ccu_div_internal div;
struct ccu_mux_internal mux;
struct ccu_common common;
+ unsigned int fixed_post_div;
};

#define SUNXI_CCU_DIV_TABLE_WITH_GATE(_struct, _name, _parent, _reg, \
--
git-series 0.9.1
--
You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+***@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
Chen-Yu Tsai
2017-07-05 04:06:47 UTC
Reply
Permalink
Raw Message
Post by Priit Laes
SATA clock on sun4i/sun7i is of type (parent) / M / 6 where
6 is fixed post-divider.
Reviewed-by: Chen-Yu Tsai <***@csie.org>
--
You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+***@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
Maxime Ripard
2017-07-05 07:43:10 UTC
Reply
Permalink
Raw Message
Post by Priit Laes
SATA clock on sun4i/sun7i is of type (parent) / M / 6 where
6 is fixed post-divider.
---
drivers/clk/sunxi-ng/ccu_div.c | 18 ++++++++++++++++--
drivers/clk/sunxi-ng/ccu_div.h | 3 ++-
2 files changed, 18 insertions(+), 3 deletions(-)
diff --git a/drivers/clk/sunxi-ng/ccu_div.c b/drivers/clk/sunxi-ng/ccu_div.c
index c0e5c10..054b12a 100644
--- a/drivers/clk/sunxi-ng/ccu_div.c
+++ b/drivers/clk/sunxi-ng/ccu_div.c
@@ -21,6 +21,9 @@ static unsigned long ccu_div_round_rate(struct ccu_mux_internal *mux,
{
struct ccu_div *cd = data;
+ if (cd->common.features & CCU_FEATURE_FIXED_POSTDIV)
+ rate /= cd->fixed_post_div;
+
return divider_round_rate_parent(&cd->common.hw, parent,
rate, parent_rate,
cd->div.table, cd->div.width,
This doesn't work.

The rate formula is
rate = parent / div / 6

Which is equivalent to
div = rate * 6 / parent

You should be multiplying the rate, not dividing it (or dividing the
parent, but then you'll also need to multiply it back after the call
to divider_round_rate_parent).

Consider this, some driver wants to set a rate of 100MHz on this
clock. The parent is 1.2GHz, and you have your postdiv of 6.

The divider we want to compute is 2, obviously.

You're doing here:
rate / 6 = parent / div

Which means that you'll end up trying to find the divider between
1.2GHz and 16.6666MHz, which is going to be 72.
Post by Priit Laes
@@ -62,8 +65,13 @@ static unsigned long ccu_div_recalc_rate(struct clk_hw *hw,
parent_rate = ccu_mux_helper_apply_prediv(&cd->common, &cd->mux, -1,
parent_rate);
- return divider_recalc_rate(hw, parent_rate, val, cd->div.table,
- cd->div.flags);
+ val = divider_recalc_rate(hw, parent_rate, val, cd->div.table,
+ cd->div.flags);
+
+ if (cd->common.features & CCU_FEATURE_FIXED_POSTDIV)
+ val /= cd->fixed_post_div;
+
+ return val;
}
static int ccu_div_determine_rate(struct clk_hw *hw,
@@ -71,6 +79,9 @@ static int ccu_div_determine_rate(struct clk_hw *hw,
{
struct ccu_div *cd = hw_to_ccu_div(hw);
+ if (cd->common.features & CCU_FEATURE_FIXED_POSTDIV)
+ req->rate *= cd->fixed_post_div;
+
I guess this is why you never really saw the issue. Combined with your
division in ccu_div_round_rate, it produces the exact rate you were
given as an argument.
Post by Priit Laes
return ccu_mux_helper_determine_rate(&cd->common, &cd->mux,
req, ccu_div_round_rate, cd);
}
@@ -89,6 +100,9 @@ static int ccu_div_set_rate(struct clk_hw *hw, unsigned long rate,
val = divider_get_val(rate, parent_rate, cd->div.table, cd->div.width,
cd->div.flags);
+ if (cd->common.features & CCU_FEATURE_FIXED_POSTDIV)
+ val /= cd->fixed_post_div;
+
If you multiply the rate before calling divider_get_val, you won't
have to do the division of the divider, with all the rounding
weirdness it might create.

Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
--
You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+***@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
Olliver Schinagl
2017-07-10 08:13:24 UTC
Reply
Permalink
Raw Message
Hey Plaes,
Post by Priit Laes
SATA clock on sun4i/sun7i is of type (parent) / M / 6 where
6 is fixed post-divider.
---
drivers/clk/sunxi-ng/ccu_div.c | 18 ++++++++++++++++--
drivers/clk/sunxi-ng/ccu_div.h | 3 ++-
2 files changed, 18 insertions(+), 3 deletions(-)
diff --git a/drivers/clk/sunxi-ng/ccu_div.c b/drivers/clk/sunxi-ng/ccu_div.c
index c0e5c10..054b12a 100644
--- a/drivers/clk/sunxi-ng/ccu_div.c
+++ b/drivers/clk/sunxi-ng/ccu_div.c
@@ -21,6 +21,9 @@ static unsigned long ccu_div_round_rate(struct ccu_mux_internal *mux,
{
struct ccu_div *cd = data;
+ if (cd->common.features & CCU_FEATURE_FIXED_POSTDIV)
+ rate /= cd->fixed_post_div;
+
return divider_round_rate_parent(&cd->common.hw, parent,
rate, parent_rate,
cd->div.table, cd->div.width,
@@ -62,8 +65,13 @@ static unsigned long ccu_div_recalc_rate(struct clk_hw *hw,
parent_rate = ccu_mux_helper_apply_prediv(&cd->common, &cd->mux, -1,
parent_rate);
- return divider_recalc_rate(hw, parent_rate, val, cd->div.table,
- cd->div.flags);
+ val = divider_recalc_rate(hw, parent_rate, val, cd->div.table,
+ cd->div.flags);
+
+ if (cd->common.features & CCU_FEATURE_FIXED_POSTDIV)
+ val /= cd->fixed_post_div;
+
+ return val;
}
static int ccu_div_determine_rate(struct clk_hw *hw,
@@ -71,6 +79,9 @@ static int ccu_div_determine_rate(struct clk_hw *hw,
{
struct ccu_div *cd = hw_to_ccu_div(hw);
+ if (cd->common.features & CCU_FEATURE_FIXED_POSTDIV)
+ req->rate *= cd->fixed_post_div;
+
return ccu_mux_helper_determine_rate(&cd->common, &cd->mux,
req, ccu_div_round_rate, cd);
}
@@ -89,6 +100,9 @@ static int ccu_div_set_rate(struct clk_hw *hw, unsigned long rate,
val = divider_get_val(rate, parent_rate, cd->div.table, cd->div.width,
cd->div.flags);
+ if (cd->common.features & CCU_FEATURE_FIXED_POSTDIV)
+ val /= cd->fixed_post_div;
+
spin_lock_irqsave(cd->common.lock, flags);
reg = readl(cd->common.base + cd->common.reg);
diff --git a/drivers/clk/sunxi-ng/ccu_div.h b/drivers/clk/sunxi-ng/ccu_div.h
index 08d0744..f3a5028 100644
--- a/drivers/clk/sunxi-ng/ccu_div.h
+++ b/drivers/clk/sunxi-ng/ccu_div.h
@@ -86,9 +86,10 @@ struct ccu_div_internal {
struct ccu_div {
u32 enable;
- struct ccu_div_internal div;
+ struct ccu_div_internal div;
struct ccu_mux_internal mux;
struct ccu_common common;
+ unsigned int fixed_post_div;
};
#define SUNXI_CCU_DIV_TABLE_WITH_GATE(_struct, _name, _parent, _reg, \
--
You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+***@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
Chen-Yu Tsai
2017-07-05 04:07:07 UTC
Reply
Permalink
Raw Message
Post by Priit Laes
Allwinner A20 is now driven by sunxi-ng CCU driver.
Add devicetree binding for it.
Reviewed-by: Chen-Yu Tsai <***@csie.org>
--
You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+***@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
Loading...