[linux-sunxi] Re: [PATCH] arm64: allwinner: a64: a64-olinuxino: add usb otg

[Maxime Ripard]

Hi,

Add usb otg support for a64-olinuxino board,
- USB0-ID connected with PH9
- USB0-VBUSDET connected with PH6
- USB-DRVVBUS controlled by N_VBUSEN pin from PMIC

How was this tested? Did you test the OTG part, or only the peripheral
part?

Maxime

[Maxime Ripard]

On Tue, Dec 12, 2017 at 1:43 PM, Maxime Ripard

Post by Maxime Ripard
Hi,

Add usb otg support for a64-olinuxino board,
- USB0-ID connected with PH9
- USB0-VBUSDET connected with PH6
- USB-DRVVBUS controlled by N_VBUSEN pin from PMIC

How was this tested? Did you test the OTG part, or only the peripheral
part?

Yes peripheral.

Please test the switching between host and peripheral then, and the
same comment applies to your bananapi-m64.

Thanks!
Maxime

[kbuild test robot]

Hi Jagan,

Thank you for the patch! Yet something to improve:

[auto build test ERROR on robh/for-next]
[also build test ERROR on v4.15-rc3]
[cannot apply to next-20171214]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]

url: https://github.com/0day-ci/linux/commits/Jagan-Teki/arm64-allwinner-a64-a64-olinuxino-add-usb-otg/20171215-084728
base: https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git for-next
config: arm64-defconfig (attached as .config)
compiler: aarch64-linux-gnu-gcc (Debian 7.2.0-11) 7.2.0
reproduce:
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# save the attached .config to linux build tree
make.cross ARCH=arm64

Error: arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts:204.1-15 Label or path reg_drivevbus not found
FATAL ERROR: Syntax error parsing input tree

---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all Intel Corporation